Wiring Diagram VW KOMBI 2013 - Battery - Starter - Alternator - Voltage regulator
| A | Battery |
| B | Starter |
| C | Alternator |
| C1 | Voltage regulator |
| J623 | Engine control unit |
| K | Dash panel insert |
| T1 | Single connector |
| T2q | 2-pin connector |
| T14a | 14-pin connector |
| T32a | 32-pin connector |
| 1 | Earth strap, battery - body |
Wiring Diagram VW KOMBI 2013 - Ignition/starter switch - X-contact relief relay
| D | Ignition/starter switch |
| J59 | X-contact relief relay |
| J623 | Engine control unit |
| T4d | 4-pin connector |
| T7c | 7-pin connector |
| T9c | 9-pin connector |
| 45 | Earth point, centre behind dash panel |
| 135 | Earth connection 2, in dash panel wiring harness |
| A32 | Positive connection (30), in dash panel wiring harness |
| A40 | Positive connection 1 (30), in dash panel wiring harness |
| A138 | Connection 2, in dash panel wiring harness |
| B273 | Positive connection (15), in main wiring harness |
| B298 | Positive connection 2 (30), in main wiring harness |
Wiring Diagram VW KOMBI 2013 - Intermittent wiper switch - Windscreen wiper motor
| E22 | Intermittent wiper switch |
| T5a | 5-pin connector |
| T7a | 7-pin connector |
| V | Windscreen wiper motor |
| 45 | Earth point, centre behind dash panel |
| 199 | Earth connection 3, in dash panel wiring harness |
Wiring Diagram VW KOMBI 2013 - Automatic intermittent wash and wipe relay - Washer pump
| J31 | Automatic intermittent wash and wipe relay |
| SA1 | Fuse 1 in fuse holder A |
| SA4 | Fuse 4 in fuse holder A |
| T2l | 2-pin connector |
| T9h | 9-pin connector |
| T12a | 12-pin connector |
| V5 | Washer pump |
| 655 | Earth point, on left headlight |
| A49 | Connection 1, in dash panel wiring harness |
Wiring Diagram VW KOMBI 2013 - Heated rear window switch - Heated rear window control relay - Heated rear window
| E15 | Heated rear window switch |
| J48 | Heated rear window control relay |
| T1 | Single connector |
| T1ap | Single connector |
| T1aq | Single connector |
| T1as | Single connector |
| T1at | Single connector |
| T1ax | Single connector |
| T2q | 2-pin connector |
| T6c | 6-pin connector |
| T9j | 9-pin connector |
| Z1 | Heated rear window |
| 74 | Earth point, under headlining |
| A61 | Positive connection (X), in instrument panel wiring harness |
VW KOMBI 2013 Immobilizer control unit J362
| Immobilizer control unit -J362 - |
|
| Connector description: |
| A - | Double fitting connector in the immobilizer reading coil -T2k - |
| B - | Octuple fitting connector, in the immobilizer control unit -T8b - |
|
|
| Connector description: |
| A - | Instrument cluster indicator control unit -J285 - |
| B - | 32-pin fitting connector, in the control unit with instrument cluster indicator -T32a - |
| 1 - | Empty |
| 2 - | OBD |
| 3 - | Terminal 15 - Ignition |
| 4 - | Turn signal - right |
| 5 - | Fuel gauge sensor |
| 6 - | Fuel gauge sensor for additional reservoir |
| 7 - | Terminal 31 - For Sensors |
| 8 - | Coolant temperature sensor |
| 9 - | Terminal 31 - General Earth Point |
| 10 - | Oil pressure switch |
| 11 - | Engine rotations input |
| 12 - | Terminal 61 - Alternator |
| 13 - | Sudden fuel variation sensor |
| 14 - | Coolant reservoir level |
| 15 - | Terminal 58 |
| 16 - | Empty |
| 17 - | Empty |
| 18 - | Empty |
| 19 - | Empty |
| 20 - | Immobilizer control unit |
| 21 - | Empty |
| 22 - | Turn signals - left |
| 23 - | Terminal 30 |
| 24 - | Terminal 31 |
| 25 - | Terminal K - Diagnosis |
| 26 - | Empty |
| 27 - | EPC |
| 28 - | Speed sensor |
| 29 - | Handbrake control switch |
| 30 - | Terminal 56a - Headlights |
| 31 - | Empty |
| 32 - | Empty |
|
|
| Connector description: |
| A - | Engine control unit -J623 - |
| B/C - | 80-pin fitting connector, in the engine control unit -T80a - |
