Wiring Diagram SEAT TOLEDO 2006 - Fresh air blower switch - fresh air and air recirculation flap switch - fresh air and air recirculation warning lamp - fresh air regulator illumination bulb - potentiometer for temperature selection rotary knob
D | Ignition/starter switch |
E9 | Fresh air blower switch |
E159 | Fresh air/air recirculation flap switch |
J285 | Control unit with display in dash panel insert |
J361 | Simos control unit |
G267 | Potentiometer for temperature selection rotary knob |
K114 | Fresh air and air recirculation warning lamp |
L16 | Fresh air regulator illumination bulb |
N24 | Fresh air blower series resistor with overheating fuse |
V2 | Fresh air blower |
V154 | Fresh air/recirculated air flap control motor |
T10v | 10-pin connector, green, in connector protective housing, on left in plenum chamber |
T10x | 10-pin connector, on air conditioning system |
45 | Earth point, behind dash panel |
162 | Earth connection, in blower motor wiring harness |
503 | Screw connection 2 (75x), on relay plate |
A2 | Positive connection (15), in dash panel wiring harness |
A11 | Positive connection (58b), in dash panel wiring harness |
A20 | Connection (15a), in dash panel wiring harness |
L48 | Connection (15a), in heater (Thermotronic) operating unit wiring harness |
L66 | Connection, in heater blower wiring harness |
Wiring Diagram SEAT TOLEDO 2006 - Radiator fan control unit - air conditioning system switch - air conditioning system warning lamp
Wiring Diagram SEAT TOLEDO 2006 - Radiator fan control unit - temperature sender for compressor switch-off - air conditioning system magnetic clutch - radiator fan
D | Ignition/starter switch |
G346 | Temperature sender for compressor switch-off |
J285 | Control unit with display in dash panel insert |
J293 | Radiator fan control unit |
N25 | Air conditioning system magnetic coupling |
V7 | Radiator fan |
V35 | Right fan for radiator |
T3b | 3-pin connector, on radiator fan |
T3c | 3-pin connector, on radiator fan |
T4l | 4-pin connector, on engine |
T4m | 4-pin connector, in left engine compartment |
12 | Earth point, on left in engine compartment |
193 | Earth connection 1, in coolant fan wiring harness |
501 | Screw connection 2 (30), on relay plate |
A32 | Positive connection (30), in dash panel wiring harness |
C11 | Connection in radiator fan wiring harness |
K21 | Connection 1, in radiator fan wiring harness |
Wiring Diagram SEAT TOLEDO 2006 - Radiator fan control unit - radiator fan thermal switch - high pressure sender
SEAT TOLEDO 2006 Overview of coupling station and connections for wiring harness
Overview of coupling station and connections for wiring harness | | | 1 - | Coupling station in protective housing, in plenum chamber |
q | With connectors -T10g-, -T10d-, -T10e-, -T10-, -T6l-, -T10h-, -T10v- |
2 - | Coupling station, right B-pillar |
3 - | Coupling station on left of C-pillar |
4 - | Coupling station on left of A-pillar |
5 - | Coupling station in engine compartment, in left wiring harness |
Toledo/León | Fitting Locations | No. 803 / 2 |
|
Coupling station in protective housing, in plenum chamber |
1 - | 10-pin connector -T10g-, grey, automatic gearbox |
2 - | 10-pin connector, -T10d-, white, data bus wire, engine control unit, automatic gearbox, Motronic control unit, ABS control unit |
3 - | 10-pin connector -T10e-, black, cruise control system, Motronic control unit, engine control unit |
4 - | 10-pin connector -T10-, orange, reversing lights, engine control unit, starter, Climatronic control unit, Motronic control unit |
5 - | 6-pin connector -T6l-, brown, starter, fuel pump relay, engine control unit |
Toledo/León | Fitting Locations | No. 803 / 3 |
|
6 - | 10-pin connector -T10h-, blue, accelerator position sender, Motronic control unit, engine control unit |
7 - | 10-pin connector, -T10v-, green, radiator outlet coolant temperature sender, radiator fan control unit, potentiometer for temperature selection rotary knob |
Toledo/León | Fitting Locations | No. 803 / 4 |
|
SEAT TOLEDO 2006 Coupling station, right B-pillarCoupling station, right B-pillar | 1 - | 10-pin connector -T10m-, black, signal loudspeakers, central locking, rear electric window regulator, rear door warning lamp | The wiring on the B-pillar, left, is installed vice versa. | | | |
SEAT TOLEDO 2006 Coupling station on left of C-pillarCoupling station on left of C-pillar | See connectors in fitting locations: Multi-pin connections. | 2 - | Rear fog light, number plate light, reversing lights | 3 - | Rear window wiper and washer system (only for Leon) | | | |
Toledo/León | Fitting Locations | No. 803 / 5 |
|
SEAT TOLEDO 2006 Coupling station on left of A-pillarCoupling station on left of A-pillar | 1 - | 10-pin connector -T10i-, black, central locking, electric mirror adjustment, radio with muting / electric windows | The wiring on the A-pillar, right, is installed vice versa. | | | |
SEAT TOLEDO 2006 Coupling station in engine compartment, in left wiring harnessCoupling station in engine compartment, in left wiring harness | See connectors in fitting locations: Multi-pin connections. | | | |