SKODA OCTAVIA II 2005 — Seat belt warning system (only for vehicles with driver airbag / driver and front passenger airbag), As of February 2004 . Wiring diagrams, Pin Connector, Location

Wiring Diagram SKODA OCTAVIA II 2005 - Belt switch - driver side - airbag control unit

E24	Belt switch - driver side
J234	Airbag control unit, on the front of the tunnel
T2r	2-pin connector, under driver seat (black)
T2s	2-pin connector, at driver seat (black)
T75a	75-pin connector, at airbag control unit
109	Earth connection (airbag), in dash panel insert wiring harness
*	only on vehicles with front passenger airbag
**	only on vehicles with driver airbag

Wiring Diagram SKODA OCTAVIA II 2005 - Airbag control unit - data bus diagnostic interface - dash panel insert

J234	Airbag control unit, on the front of the tunnel
J285	Control unit in dash panel insert
J533	Data bus diagnostic interface, below dash panel, centre
K	Dash panel insert
K19	Seat belt warning system warning lamp
T20c	20-pin connector, at data bus diagnostic interface
T36a	36-pin connector, at dash panel insert
T75a	75-pin connector, at airbag control unit
B383	Connection -1- (CAN H, drive), in interior wiring harness
B390	Connection -1- (CAN L, drive), in interior wiring harness
B506	Connection (CAN H, dash panel insert), in interior wiring harness
B507	Connection (CAN L, dash panel insert), in interior wiring harness
*	not valid as of 05.04