BeschreibungDie Deckenleuchte vorne enthalt zwei Lampen mit zwei Betatigungsschaltern.Mit dem linken Schalter konnen folgende Funktionen aktiviert werden:Mittelstellung: zeitgesteuertes Einschalten der Leuchten,Linke Stellung: beide Leuchten immer aus,Rechte Stellung: beide Leuchten immer ein.Mit dem rechten Schalter kann nur eine Leuchte eingeschaltet werden:Linke Stellung: linke Leuchte immer ein.Rechte Stellung: rechte Leuchte immer ein;Mittelstellung: beide Leuchten immer aus.Die hintere Deckenleuchte hat nur eine Lampe mit verschiedenen Funktionsweisen, die von der Stellung der Klarsichtabdeckung abhangig ist, die den Innenschalter betatigt:Neutralstellung: Leuchte zeitgesteuert ein ,Stellung auf der einen Seite: Leuchte immer AUS,Stellung auf der anderen Seite: Leuchte immer EIN.Das Einschalten der zwei Deckenleuchten erfolgt zeitgesteuert gem. einer Logik, die vom Body Computer verwaltet wird:Wenn eine Vordertur geoffnet wird, erfolgt fur 3 Minuten die Zeitschaltung der Innenleuchten.Falls nach Offnen einer Tur noch eine Tur geoffnet wird, fangt die 3-Minuten-Zahlung wieder bei Null an.Bleibt eine Tur langer als 3 Minuten offen, schalten sich die Innenleuchten aus, bis wieder eine Tur geoffnet wird.Falls wahrend der 3 Minuten alle Turen geschlossen werden, lauft eine zweite Zeitschaltung von 7 s an, die unterbrochen wird, falls der Zundschlussel auf MARCIA gedreht wird.Die Innenleuchten werden fur 10 s eingeschaltet, wenn die Fernbedienung zum Offnen der Turen betatigt wird. Die Zeitsteuerung wird unterbrochen, wenn der Zundschlussel auf MAR gestellt wird.Werden die Turen geschlossen und verriegelt, dann werden die Innenleuchten ausgeschaltet.Ein- und Ausschaltung erfolgen allmahlich (Dimmer) binnen 2 s.Mit dem Schlussel auf STOP pruft der Body Computer, ob der Zundschlussel abgezogen worden ist (Transponder fehlt). Dann werden die Innenleuchten vorne und hinten wie beschrieben geschaltet.Die Innenleuchten werden ohne Dimmerschaltung auch eingeschaltet, wenn der Sicherheitsschalter anspricht (Information uber das CAN-Netz zur Instrumententafel).Die Funktion ist mit dem Zundschlussel auf MAR maximal 15 Minuten aktiv.Der Body Computer erfasst kontinuierlich das Signal 'Batteriespannung' und vergleicht es mit dem Schwellenwert: Ist die Batteriespannung niedriger als der Schwellenwert, dann erfolgt uber das CAN-Netz ein Signal zur Abschaltung verschiedener Verbraucher, u.a. die zwei Innenleuchten vorne und hinten. Die Funktion arbeitet mit dem Zundschlussel auf STOP.Ist eine Tur oder der Kofferraumdeckel offen, was vom Body Computer erfasst wird, und 3 km/h werden uberschritten, dann folgt ein akustisches Zeichen.
Funktionsbeschreibung Der Body Computer M1 erhalt am Eingang die Signale 'Tur offen' am Pin 8 (links) bzw. 25 (rechts) des Steckers E. Der Body Computer M1 schaltet dann gem. der beschriebenen Logik die zwei Innenleuchten ein:am Pin 23 des Steckers E wird die vordere Leuchte G10 geschaltet, am Pin 21 des selben Steckers steht die Masse fur den Zeitgeber,am Pin 33 des Steckers E wird die hintere Leuchte G20 geschaltet, am Pin 37 des selben Steckers steht die Masse fur den Zeitgeber. Der Body Computer M1 ist mit der Instrumententafel E50 verbunden, die das Signal 'Sicherheitsschalter EIN' sendet, das die Innenleuchten und ggf. die Kontrollleuchte 'Turen offen' einschaltet. Uber das CAN-Netz 3038761SieheE1050CAN-VERBINDUNGSLEITUNGEN kommt auch das Signal 'Batteriespannung zu niedrig', das ggf. die Innenleuchten ausschaltet.
0Ausbau201Wiedereinbau213041404-7040A37Sicherungen - Kastendeckelauf dem Armaturenbrett a.u.e.1. Die elektrischen vorderseitigen Anschlusse (1a, 1b, 1c, 1d,1e, 1f) abklemmen.2. Befestigungsschrauben der Elektronik losen.3. Die angegebenen Befestigungsschrauben der Armaturenverkleidungabschrauben.2004865
0Ausbau201Wiedereinbau211. Prufen, ober Zundschlussel auf 'STOP' steht, dann Minuskabel(-) von der Batterie abklemmen.2. Den Deckel des Sicherungskastens 'Maxi-Fuse' offnen.3. Befestigungsschrauben des 'Maxi-Fuse'-Sicherungskastens herausschrauben.4. Schraubenbolzen am Pluspol (+) der Batterie lockern.5. Sicherungskasten 'Maxi-Fuse' von der Batterie trennen und seitlichverschieben.2004975
5530B14
Vorsichtma?nahmenbeachten:769768768
5530B18
Folgende Hinweisebeachten769Bei Batterien mit optischem Standmesserist es moglich, den Stand des Elektrolyts und den Ladezustand derBatterie je nach Farbe des optischen Anzeigers zu ermitteln. eine klare und weisse Farbe zeigt einenunausreichenden Elektrolytstand an: mit destilliertem Wasser auffulleneine dunkle Farbe ohne grunes Feld zeigteinen korrekten Elektrolytstand mit niedriger Batterieladung an:die Batterie muss geladen werden. eine dunkle Farbe mit grunem Bereich inder Mitte zeigt einen korrekten Elektrolyt- und Ladezustand der Batteriean: es muss keinerlei Eingriff durchgefuhrt werden. Fur weitere Einzelheiten siehe BESCHREIBUNG UNDFUNKTIONSWEISE 5530.768Wie folgt vorgehen:Leerlaufspannung der Batterie mit dem vomKD empfohlenen Me?gerat 'MICRO 360' messen. Je nach gemessenem Spannungswert, der denLadezustand anzeigt, wie folgt vorgehen:Bei Leerlaufspannung unter 12,10 V dieBatterie ersetzen (siehe Arbeit 5530B10).Bei Leerlaufspannung uber 12,10 V, aberunter 12,50 V die Batterie nachladen (siehe Arbeit 5530B14).Bei Leerlaufspannung uber 12,50 V istdie Batterie geladen.Ggf. den Saurestand wie folgt erganzen:Band mit den Verschlussen abziehen.Destilliertes, entionisiertes Wasser nachfullen.Vorsicht, da? keine Spritzer nach au?en verursacht werden.768
0Ausbau201Wiedereinbau21Das Fahrzeug auf die Hebebuhne fahren.Motorhaube offnen.1. Halterungen (1a) offnen und den Deckel (1b) abnehmen2004980
5530B40
0Ausbau201Wiedereinbau21Motorhaube offnen.1. Halterungen (1a) offnen und den Deckel (1b) abnehmen2004986
5530B52
0Ausbau201Wiedereinbau21Mit dem Ausbau fortfahren 3041136-5530B10Batterie a.u.e. .1. Deckel vom Sicherungs- und Relaiskastengehause entfernen.2. Mutter (2a) herausschrauben und Massekabel (2b) des Sicherungs-und Relaiskastens trennen.2004990
5530B60
0Ausbau201Wiedereinbau213041136-5530B10Batterie a.u.e.1. Batterieablage entfernen.2. Die Schrauben (2a) abschrauben und die Schraube (2b) zur Befestigungdes Batteriekorbes lockern.3. Leicht den Batteriekorb verschieben.4. Halteknopf des Riemens losen.5. Riemen entfernen.2005002
0Ausbau201Wiedereinbau211. Halter der Schalterblende von der Armaturenbrettverkleidung losen.2. Elektrischen Anschluss abziehen.3. Schalterblende abnehmen.2005045
0Ausbau201Wiedereinbau211. Innenleuchte abhebeln.767Auf der gezeigten Seite arbeiten.2. Elektrische Verbindung abklemmen.3. Falls erforderlich, Gluhlampe von den Haltefedern abnehmen.2005309
7040E21
0Ausbau201Wiedereinbau211. Deckel der Deckenleuchte abnehmen.2. Ggf. die Lampe herausnehmen.2005310
7040E24
0Ausbau201Wiedereinbau211. Schraube herausschrauben2. Deckenleuchte von den Halterungen losen.3. Elektrische Verbindung abklemmen.2005311
7040E40
0Ausbau201Wiedereinbau211. Deckenleuchte von den Halterungen losen, indem man auf die angegebeneStelle druckt.2. Die Innenleuchte leicht verschieben, damit der elektrische Anschlu?getrennt werden kann.2005313
0Ausbau201Wiedereinbau213041222-5580E08Antenne fur Wegfahrsperrea.u.e.1. Elektrische Anschlusse (1a, 1b) vom Anlasserschalter abklemmen.2. Eine Plombe und die kopflosen Schrauben (2a) abschrauben. Anlasserschalter(2b) entfernen.7682004913
5520A14
769
5520A16
769
5520A18
0Ausbau201Wiedereinbau211. Ggf. Lenkradverstellhebel benutzen.2. Befestigungsschrauben der unteren Abdeckung losen.3. Untere Abdeckung von den Innenhalterungen und dem Lenkrad losen.2004920
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept All”, you consent to the use of ALL the cookies. However, you may visit "Cookie Settings" to provide a controlled consent.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.