Čeština
Dansk
Deutsch
Ελληνικά
English
English
Español
Suomi
Français
Français
עברית
Hrvatski
Magyar
Italiano
日本語
한국어
Nederlands
Polski
Português
Português
Română
Slovenčina
Slovenščina
Svenska
Türkçe
中文 (中国)
Wiring diagram - DIPPED HEADLAMPS - Alfa Romeo GT 3.2 V6
Components - DIPPED HEADLAMPS - Alfa Romeo GT 3.2 V6
| Component code | Name | Assembly reference |
| B1 | JUNCTION UNIT | - |
| B2 | JUNCTION UNIT UNDER DASHBOARD | |
| B5 | MAXI FUSE-1 BOX | - |
| B99 | MAXIFUSE BOX ON BATTERY | |
| C10 | FRONT LEFT EARTH ( FRONT ) | - |
| C11 | RIGHT FRONT EARTH ( FRONT ) | - |
| C15 | FACIA EARTH, DRIVER''S SIDE | - |
| F10 | LEFT HEADLAMP ( FRONT ) | |
| F11 | RIGHT HEADLAMP | |
| H1 | IGNITION SWITCH | |
| H5 | STEERING COLUMN SWITCH UNIT | |
| M1 | BODY COMPUTER |
Location of components - DIPPED HEADLAMPS - Alfa Romeo GT 3.2 V6
Components - DIPPED HEADLAMPS - Alfa Romeo GT 3.2 V6
| Component code | Name | Assembly reference |
| B1 | JUNCTION UNIT | - |
| B2 | JUNCTION UNIT UNDER DASHBOARD | |
| B5 | MAXI FUSE-1 BOX | - |
| B99 | MAXIFUSE BOX ON BATTERY | |
| C10 | FRONT LEFT EARTH ( FRONT ) | - |
| C11 | RIGHT FRONT EARTH ( FRONT ) | - |
| C15 | FACIA EARTH, DRIVER''S SIDE | - |
| F10 | LEFT HEADLAMP ( FRONT ) | |
| F11 | RIGHT HEADLAMP | |
| H1 | IGNITION SWITCH | |
| H5 | STEERING COLUMN SWITCH UNIT | |
| M1 | BODY COMPUTER |
Description - DIPPED HEADLAMPS - Alfa Romeo GT 3.2 V6
The vehicle is equipped with two dipped headlamps in the light clusters.The dipped beam headlamps are switched on through the steering column switch by turning the specific ring to the position after the side lights.A special relay in the underdashboard control unit controls the switching on of the dipped headamps via two lines protected by special fuses.The relay for switching on the dipped headlamps is managed by the Body Computer: the energizing of the relay is activated by the go ahead signals with the ignition key in the ON position (INT) and by the specific signal from the steering column switch unit.The Body Computer also manages the ''dipped headlampa maintenence'' function: when the main beam headlamps are on, the Body Computer keeps the dipped headlamps on.If the dipped headlamps and the main beam headlamps are already on, then the fog lights cannot be switched on.Similarly, if the dipped headlamps and the fog lights are on and main beam headlamps are switched on, then the fog lights are switched off.The ''Follow me home'' function is designed to keep the dipped headlamps and the side lights on after the engine has been switched off (key in OFF and/or PARK) for a time of 30 seconds or multiples thereof.Keeping the dipped headlamps on is signalled by the side lights warning light in the instrument panel remaining on.The funciton is switched on by operating the flasher lever within 2 minutes: each time the lever is operated the time the lights remain on increases by 30 seconds up to a maximum of 210 secs.Operating the flasher lever for longer than 2 seconds switches the function off; the function is also switched off if the ignition key is turned to the ON position.
Functional description - DIPPED HEADLAMPS - Alfa Romeo GT 3.2 V6
The dipped beam activation signal is sent to pin 4 of connector D of the Body ComputerM1from the stalk unitH5.The ''ignition ON'' signal (INT) for the switch H1 reaches the underdashboard control unitB2at pin 11 of connector H and from there moves on to the Body ComputerM1(pin 9 of connector F).The Body ComputerM1controls the supply of the dipped headlamps sending an earth signal to the underdashboard control unitB2- from pin 8 of connector F of M1 - which energizes the relay T1: this supplies the dipped headlampsF10(left) andF11(right). Each circuit is protected by a control unitB2fuse: F13 for the left headlamp and F12 for the right one.
