DescriptionWhen the boot is opened the luggage compartment light is turnedon which goes out when the boot is closed.The Body Computer continuously acquiresthe 'battery voltage' signal and compares it with a limit ('SBMT'function): if the battery voltage level goes below this limit, itintervenes through the CAN sending a signal to disable a seriesof loads: these include the front courtesy light; this functionis activated with the key in the OFF position; this function alsodeactivates loads after 15 minutes with the key in the OFF position.
Functional description The boot open switch I11 sends an earth signal, when the bootis open, to pin 36 of connector E of M1 to switch on the courtesylight G40. On the basis of the control logic describedpreviously, the Body Computer M1 supplies the boot courtesy lightG40 from pin 23 of connector E. The 'low battery voltage' signal which switchesoff the courtesy lights if they are on, reaches the Body Computer M1 viathe CAN 2429872SeeE1050CAN CONNECTION LINES line.
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Open the tailgate.1. Working in the direction of the arrow, release the retainer (1a)and move the bulb holder (1b).2. Disconnect the electrical connection.2045235
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Disconnect the electrical connection for the microswitch.2. Undo the bolts.3. Move the lock (3a) slightly and disconnect the electrical connection(3b) for the motor.4. Remove the lock assembly (4a) releasing the emergency openingcable (4c) from the retainers (4b).2429540-7015B70tail-gate lock motor - r r and check lock supplyline , if necessary. 2045173
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Open the bonnet lid.1. Release the retainers (1a) and remove the cover (1b).2044997
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting212429579-7040A30Left instrument panellower TRIM - R.R.1. Disconnect the electrical connections (1a, 1b, 1c, 1d, 1e, 1f).2. Undo the left-threaded bolt securing the facia trim mount beam.3. Undo the bolts securing the body computer/junction unit.4. Move facia trim (4a) slightly and move body computer/junctionunit (4b) downwards.5. Disconnect the electrical connections (5a, 5b, 5c).6. Recover the body computer/junction unit.2045005
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Disconnect electronic control unit electrical connections (1a),(1b), (1c).2. Undo the bolts.3. Recover the control unit2045007
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Disconnect electronic control unit electrical connections (1a),(1b), (1c).2. Undo the bolts.3. Recover the control unit2045008
English
