SUPPLEMENTAL RESTRAINTS – Mercury Sable LS 2002 – SYSTEM WIRING DIAGRAMS

SUPPLEMENTAL RESTRAINTS

Supplemental Restraint Wiring Diagram (1 of 2) for Mercury Sable LS 2002

List of elements for Supplemental Restraint Wiring Diagram (1 of 2) for Mercury Sable LS 2002:

• (driver side "a" pillar) g202
• Air bag indicator
• C220b
• C270b
• C270c
• C310a
• C310b
• Central junction box (under left side of dash)
• Feed
• Fuse f2.23 10a
• Fuse f2.27 10a
• Ground
• Hot in run
• Ignition
• Ind ctrl
• Input
• Instrument cluster
• Iso bus
• Left safety belt assembly
• Left side air bag sensor (under left front seat)
• Monitor
• Nca
• Or start
• Pin shorting bars engaged when module connector is disconnected from harness. shorting bars are connected between following pins: 1-2, 3-4, 5-6, 13-14 & 15-20 c310a 1-2 & 21-22 c310b
• Red
• Restraints control module (under center of dash)
• Return
• Right safety belt assembly
• Right side air bag sensor (under right front seat)
• S236 (under driver side dash panel, left "a" pillar)
• Safety belt buckle pretensioner
• Safety belt buckle switch
• Sense
• Tone driver

Supplemental Restraint Wiring Diagram (2 of 2) for Mercury Sable LS 2002

List of elements for Supplemental Restraint Wiring Diagram (2 of 2) for Mercury Sable LS 2002:

• Air bag sliding contact
• Air bag tone driver
• C201c
• Data link connector (dlc) (partial) (mounted on dash, below steering column)
• Driver air bag unit
• Forward crash sensor (behind right side of front bumper)
• Generic electronic module (gem) (under left side of dash)
• Left seat track position sensor (under left side driver seat)
• Left side air bag module
• Nca
• Passenger air bag module
• Red
• Right side air bag module
• S213 (under driver side, dash panel)
• Shorting bar
• Stage 1
• Stage 2
• W/ power seats
• W/o power seats