ENGINE PERFORMANCE – Nissan Pickup 1997 – SYSTEM WIRING DIAGRAMS

ENGINE PERFORMANCE

2.4L

2.4L, Engine Performance Wiring Diagrams (1 of 3) for Nissan Pickup 1997

List of elements for 2.4L, Engine Performance Wiring Diagrams (1 of 3) for Nissan Pickup 1997:

• (for gst)
• (left kick panel)
• (under left side of i/p,
• (under right side of i/p) data link connector
• A/c system
• Absolute pressure sensor (right rear of engine compt)
• Crank- shaft position sensor (left rear of eng)
• Data link connector
• Eccs relay (in engine compt relay box)
• Egr temper- ature sensor (rear of engine)
• Engine coolant temperature sensor (left front of eng)
• Engine control module (ecm) (below passenger's seat)
• Evap canister purge volume control valve (right rear corner of engine compt)
• Evap control system pressure sensor (right rear of vehicle)
• For consult
• Fuel tank gauge unit (in fuel tank)
• Fuse 10a
• Fuse block
• G200
• Hot at all times
• Instrument cluster syst.
• Intake air temperature sensor (right side of engine)
• J/c 1 (below passenger's seat)
• J/c 2 (left kick panel)
• Mass air flow sensor (right side of engine)
• Nca
• On fuse block)
• Pnk
• Red
• Resistor (left front of eng)
• Vacuum cut valve bypass valve (right rear of vehicle)

2.4L, Engine Performance Wiring Diagrams (2 of 3) for Nissan Pickup 1997

List of elements for 2.4L, Engine Performance Wiring Diagrams (2 of 3) for Nissan Pickup 1997:

• A/t
• Acc
• Closed
• Cruise control system
• Diode
• Evap canister purge control solenoid valve (front of engine below throttle body)
• G101 (right front of engine compt)
• G120 (right side of engine)
• G134 (top of engine)
• G300 (below driver's seat)
• Hot at all times
• Ignition switch
• J/c 1 (below passenger's seat)
• M/t
• Nca
• Neutral position switch (on transmission)
• O/d cancel sol valve
• Off
• Overdrive switch
• Park and neutral position relay (on transmission)
• Pnk
• Power steering oil pressure switch (front of eng)
• Red
• Solenoid valve unit (right rear of engine compt)
• Start
• Tcc sol valve
• Throttle position sensor (front of throttle body)
• Throttle position switch (front of throttle body)
• Wide open

2.4L, Engine Performance Wiring Diagrams (3 of 3) for Nissan Pickup 1997

List of elements for 2.4L, Engine Performance Wiring Diagrams (3 of 3) for Nissan Pickup 1997:

• (left kick panel)
• 1o1
• Cam- shaft position sensor
• Condenser
• Distributor
• Egrc solenoid valve (center rear of eng, side of egr valve)
• Engine control module (ecm) (below passenger's seat)
• Evap canister vent control valve (right rear of vehicle)
• Front heated oxygen sensor (on ex- haust manifold)
• Fuel injectors
• Fuel pump (in fuel tank)
• Fuel pump relay (in eng compt relay box)
• Fuse 10a
• Fuse 15a
• Fuse block
• G134 (top of engine)
• G200
• G200 (left kick panel)
• G301 (below passenger's seat)
• Hot in on or start
• Hot in start
• Iacv-acc valve (rear of eng)
• Ignition coil
• Instrument cluster
• J/c 2 (left kick panel)
• Malfunction indicator lamp
• Map/baro switch sol valve (right rear of eng compt)
• Nca
• O/d off indicator lamp
• Power transistor
• Rear heated oxygen sensor (front of catalytic converter)
• Red
• Speedo- meter
• Swirl control valve control solenoid valve (right rear of engine)
• Swirl control valve control vacuum check switch (right side of eng compt)
• Vehicle speed sensor (on trans- mission)