Fiat ULYSSE 2.0 16v fino a 04/03 – TYRE INFLATION PRESSURE CONTROL SYSTEM – – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

Wiring Diagram - TYRE INFLATION PRESSURE CONTROL SYSTEM - Fiat ULYSSE 2.0 16v fino a 04/03

TYRE PRESSURE MONITORING SYSTEM WIRING DIAGRAM Fiat ULYSSE 2.0 16v fino a 04/03

Components - TYRE INFLATION PRESSURE CONTROL SYSTEM - Fiat ULYSSE 2.0 16v fino a 04/03

Component code	Description	Reference to the assembly
	Driver''s dashboard earth	-
	Passenger dashboard earth	-
	Dashboard/rear coupling	-
	Instrument panel	5560B
	Tyre inflation pressure sensor	4450B
	Body computer	5505A
	Steering wheel node control unit (NVO)	5550A
	Warning lights and milometer control unit (NSO)	-

Location Components - TYRE INFLATION PRESSURE CONTROL SYSTEM - Fiat ULYSSE 2.0 16v fino a 04/03

TYRE PRESSURE MONITORING SYSTEM LOCATION COMPONENTS Fiat ULYSSE 2.0 16v fino a 04/03

Tüm kablolama şemalarına erişin araba

Components - TYRE INFLATION PRESSURE CONTROL SYSTEM - Fiat ULYSSE 2.0 16v fino a 04/03

Component code	Description	Reference to the assembly
C015	Driver''s dashboard earth	-
C020	Passenger dashboard earth	-
D020	Dashboard/rear coupling	-
E050	Instrument panel	5560B
K171	Tyre inflation pressure sensor	4450B
M001	Body computer	5505A
M093	Steering wheel node control unit (NVO)	5550A
M140	Warning lights and milometer control unit (NSO)	-

Operational Description - TYRE INFLATION PRESSURE CONTROL SYSTEM - Fiat ULYSSE 2.0 16v fino a 04/03

The tyre monitoring system is managed by sensor K171 that communicates data to steering wheel node M093 via a radiofrequency signal.The tyre control information is sent by the steering wheel node control unit M093 to the body computer node M001. The signal travels via the CAN which connects the two control units.The steering wheel node control unit M093 receives a supply (pin 5 connector A) through the line protected by fuse F11, located in the body computer node M001; it receives a supply via the CAN (pin 6 connector A) from the line protected by fuse F16, located in the body computer node M001.The STOP warning light is switched on by the milometer warning lights node M140 which communicates with the instrument panel E050 and the body computer node M001 via the CAN.The instrument panel E050 and the milometer warning lights node M140 receive a supply via the CAN (pin 13 of E50 and pin 4 of M140) through the line protected by fuse F24 of the body computer M001.

Description - TYRE INFLATION PRESSURE CONTROL SYSTEM - Fiat ULYSSE 2.0 16v fino a 04/03

The car is fitted with numerous electronic control units that perform a self-diagnostic function.When a diagnostic tester (Examiner or other device) is connected to these control units, self-diagnosis data can be read (parameters, errors) or the available active diagnostic tests can be carried out.All the diagnostic lines flow into the EOBD connector (European On Board Diagnosis) which conforms with Directive 98/69/CE (EURO 3) - ISO standard J1962 in the Body Computer connector G.Nodes connected to the network are diagnosed via the CAN network, while the dynamic car control network is diagnosed by a specific K lines.The following are monitored via individual diagnostic K lines:engine management control unit;automatic transmission control unit;ABS control unit;additional heater control unit (JTD only);headlamps control unit (versions with gas discharge headlamps)All the other control units and CAN nodes are connected to the diagnostic socket through the body computer: For more details

Component code	Description	Reference to the assembly
C015	Driver''s dashboard earth	-
C020	Passenger dashboard earth	-
D020	Dashboard/rear coupling	-
E050	Instrument panel	5560B
K171	Tyre inflation pressure sensor	4450B
M001	Body computer	5505A
M093	Steering wheel node control unit (NVO)	5550A
M140	Warning lights and milometer control unit (NSO)	-