Fiat ULYSSE 2.2 16V JTD fino a 04/03 – HEATED SEATS – – MY 2005 – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

HEATED SEATS WIRING DIAGRAM Fiat ULYSSE 2.2 16V JTD fino a 04/03

Components - HEATED SEATS - Fiat ULYSSE 2.2 16V JTD fino a 04/03

Component code	Description	Reference to the assembly
B001	ENGINE COMPARTMENT JUNCTION UNIT
B005	MAXI FUSE BOX	-
B098	ADDITIONAL FUSE BOX	-
C020	PASSENGER SIDE DASHBOARD EARTH	-
C030	LEFT REAR EARTH	-
C031	RIGHT REAR EARTH	-
D070	DRIVER''S SEAT COUPLING	-
D071	PASSENGER SEAT COUPLING	-
H001	Ignition switch
I065	DRIVER''S SEAT HEATING SWITCH
I066	PASSENGER SEAT HEATING SWITCH
M001	BODY COMPUTER
M110	FRONT PASSENGER SEAT HEATER CONTROL UNIT	-
M170	DRIVER''S FRONT SEAT HEATER CONTROL UNIT	-
O046	LEFT FRONT SEAT HEATER PAD WITH SENSOR	-
O047	RIGHT FRONT SEAT HEATER PAD WITH SENSOR	-
O048	LEFT FRONT BACKREST HEATER PAD	-
O049	RIGHT FRONT BACKREST HEATER PAD	-

HEATED SEATS COMPONENT LOCATION Fiat ULYSSE 2.2 16V JTD fino a 04/03

Tüm kablolama şemalarına erişin araba

Component code	Description	Reference to the assembly
B001	ENGINE COMPARTMENT JUNCTION UNIT
B005	MAXI FUSE BOX	-
B098	ADDITIONAL FUSE BOX	-
C020	PASSENGER SIDE DASHBOARD EARTH	-
C030	LEFT REAR EARTH	-
C031	RIGHT REAR EARTH	-
D070	DRIVER''S SEAT COUPLING	-
D071	PASSENGER SEAT COUPLING	-
H001	Ignition switch
I065	DRIVER''S SEAT HEATING SWITCH
I066	PASSENGER SEAT HEATING SWITCH
M001	BODY COMPUTER
M110	FRONT PASSENGER SEAT HEATER CONTROL UNIT	-
M170	DRIVER''S FRONT SEAT HEATER CONTROL UNIT	-
O046	LEFT FRONT SEAT HEATER PAD WITH SENSOR	-
O047	RIGHT FRONT SEAT HEATER PAD WITH SENSOR	-
O048	LEFT FRONT BACKREST HEATER PAD	-
O049	RIGHT FRONT BACKREST HEATER PAD	-

The front seats may be equipped with a special heating system comprising two elements located in the cushion and the backrest: this allows the seat to be heated to overcome the discomfort of cold passenger compartments, e.g. when the car is left in the open for long periods in winter.The heating device, located in both front seats, consists of two resistors operated by a switch located on the outside of each seat.There are four positions for the control for switching the heating system on/off:- 0 = off;- 1 = minimum heating;- 2 = medium heating;- 3 = maximum heating.A special LED in the actual switches indicates that the resistances are switched on.The resistances can be switched on with the engine running.

The command for the electrical heating of the front seats is activated by switches I065 and I066 housed in the actual seats.The body computer node M001 supplies (pin 7 connector H) the switches I065 and I065 (pin 3) and the seat heating control units M110 and M170 (pin 3 connector A).The switches I065 and I066 (pin 1) provide the control units M170 and M110 (pin 2 connector A) with a voltage that varies according to the position of the selector. Once the signal is received, the control units activate:- from pins 1, 2, 3, 4 of connector B, the resistance for heating the cushion for the seat O046 and O047 (pins 1, 2, 3, 4 respectively);- from pins 1 and 2 of connector C, the resistance for heating the backrest O048 and O049 (pins 1, 2).