WARNING SYSTEMS – Buick LeSabre Limited 2004 – SYSTEM WIRING DIAGRAMS

WARNING SYSTEMS

Warning Systems Wiring Diagram for Buick LeSabre Limited 2004

List of elements for Warning Systems Wiring Diagram for Buick LeSabre Limited 2004:

• (in i/p harness, 30.5 cm from i/p integration module breakout) s251
• (on left front of engine compt) electronic brake control module
• A11
• A12
• A14
• A15
• A16
• Battery
• Chck tire pressures
• Class 2 (ibm)
• Class 2 (sdm)
• Class 2 serial data
• Computer data lines system
• Dash integration module (behind right side of dash, under sound insulator)
• Door open
• Driver door lock actuator
• Driver information center (dic)
• Driver's door module (ddm)
• Exterior lights system
• Fasten safety belt ind
• G200 (on left front door pillar)
• Ground
• Headlamp switch
• Heater & a/c control
• Hot at all times
• Ign
• Ign sw fuse 15a
• Ignition key alarm switch (closed w/ key in ignition)
• Inflatable restraint sensing & diagnostic module (sdm) (under rear of center console, mounted to floor pan)
• Instrument panel cluster (ipc)
• Instrument panel integration module (behind left side of dash)
• Key in ignition sw
• Key in signal
• Left seat belt sw
• Left turn
• Left turn ind
• Lf door open switch signal
• Logic
• Low reference
• Nca
• Off
• Park
• Park brake sw
• Park lamp switch
• Park lamp switch on signal
• Power distribution system
• Powertrain control module (in air cleaner housing)
• Radio
• Rear fuse block (under left rear seat)
• Right turn
• Right turn ind
• S208
• S226
• S252 (in i/p harness, 37 cm from i/p integration module breakout)
• Seat belt switch (closed w/seat belt unbuckled) (in seat belt assembly, near floor)
• Serial data
• Sp200
• Tan
• Turn signal/ hazard flasher module (behind left side of dash, above data link connector)
• W/ automatic air conditioning
• W/ manual air conditioning