TRANSMISSION – Porsche Boxster 2008 – SYSTEM WIRING DIAGRAMS

TRANSMISSION

Transmission Wiring Diagram (1 of 2) for Porsche Boxster 2008

List of elements for Transmission Wiring Diagram (1 of 2) for Porsche Boxster 2008:

• (at right side of eng compt) gp9
• (pins 56-81 not used)
• A/d converter gnd
• Can hi
• Can higher drive
• Can lo
• Can lover drive
• Can term resistor h
• Can term resistor l
• Diagnosis connector (below left side of dash)
• Drive sp
• Drive sp gnd
• Drive sp shdl
• Electronic gnd
• Eng sp turbine shld
• Fuse f5 15a
• Fuse f8 7.5a
• Fuse holder b (on fuse support, under left side of dash, at left kick panel)
• Fuse holder c (on fuse support, under left side of dash, at left kick panel)
• Ground
• Hot at all times
• Hot w/ term 15 relay energized
• K lead diagnosis
• Manual prog shift
• Manual program sw
• Mfi-di control unit (left side of rear luggage compt)
• Nca
• Position sw line 4
• Position sw1
• Position sw2
• Position sw3
• Press regulator 3
• Press regulator 4
• Pressure ctlr 1
• Pressure regulator
• Pwr gnd
• Sensor drive speed
• Sensor temperature atf
• Solenoid valve 1
• Solenoid valve 2
• Solenoid valve 3
• Solenoid valve solenoid regulator
• Solenoid,shift lock
• Term 15
• Term 30
• Tiptronic control unit (right rear of luggage compt)
• Transmission control (on gear box)
• Turbine sensor

Transmission Wiring Diagram (2 of 2) for Porsche Boxster 2008

List of elements for Transmission Wiring Diagram (2 of 2) for Porsche Boxster 2008:

• 50+
• Cooling water stop valve
• Fuse f5 25a
• Fuse holder d (on fuse support, under left side of dash, at left kick panel)
• Gp5 (at right side of dash)
• Gp9 (at right side of eng compt)
• Ground
• Hot w/ mfi-di relay energized
• Instrument cluster
• Key lock switch
• Lock magnet
• M-program switch
• Mfi-di control unit (left side of rear luggage compt)
• Pas control unit (under dash, left of steering column)
• Selector lever pos sw
• Tiptronic lifting switch
• Tiptronic selector lever switch