Fiat GRANDE PUNTO 1.4 16v – COURTESY LIGHTS – – HIGH trim level – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

WIRING DIAGRAM - COURTESY LIGHTS - Fiat GRANDE PUNTO 1.4 16v

COURTESY LIGHTS - WIRING DIAGRAM Fiat GRANDE PUNTO 1.4 16v

COMPONENTS - COURTESY LIGHTS - Fiat GRANDE PUNTO 1.4 16v

Component code	Description	Reference to the operation
B001	JUNCTION UNIT
B099	MAXI FUSE BOX ON BATTERY
C015	DASHBOARD EARTH, DRIVER'S SIDE	-
C030	LEFT REAR EARTH	-
D030	DRIVER'S FRONT DOOR COUPLING	-
D031	PASSENGER FRONT DOOR COUPLING	-
D035	LEFT REAR DOOR COUPLING	-
D036	RIGHT REAR DOOR COUPLING	-
E050	INSTRUMENT PANEL
G010	FRONT COURTESY LIGHT
G020	REAR (CENTRE) COURTESY LIGHT	-
H001	IGNITION SWITCH
M001	BODY COMPUTER
N050	DRIVER'S FRONT DOOR LOCK GEARED MOTOR
N051	RIGHT FRONT DOOR LOCK GEARED MOTOR
N055	LEFT REAR DOOR LOCK GEARED MOTOR
N056	RIGHT REAR DOOR LOCK GEARED MOTOR

COMPONENT LOCATION - COURTESY LIGHTS - Fiat GRANDE PUNTO 1.4 16v

COURTESY LIGHTS - COMPONENT LOCATION Fiat GRANDE PUNTO 1.4 16v

获取访问所有汽车的接线图

Component code	Description	Reference to the operation
B001	JUNCTION UNIT
B099	MAXI FUSE BOX ON BATTERY
C015	DASHBOARD EARTH, DRIVER'S SIDE	-
C030	LEFT REAR EARTH	-
D030	DRIVER'S FRONT DOOR COUPLING	-
D031	PASSENGER FRONT DOOR COUPLING	-
D035	LEFT REAR DOOR COUPLING	-
D036	RIGHT REAR DOOR COUPLING	-
E050	INSTRUMENT PANEL
G010	FRONT COURTESY LIGHT
G020	REAR (CENTRE) COURTESY LIGHT	-
H001	IGNITION SWITCH
M001	BODY COMPUTER
N050	DRIVER'S FRONT DOOR LOCK GEARED MOTOR
N051	RIGHT FRONT DOOR LOCK GEARED MOTOR
N055	LEFT REAR DOOR LOCK GEARED MOTOR
N056	RIGHT REAR DOOR LOCK GEARED MOTOR

DESCRIPTION - COURTESY LIGHTS - Fiat GRANDE PUNTO 1.4 16v

The front courtesy light includes two lamps with three control pushbuttons: the pushbuttons can be used to turn on the corresponding light directly or in a timed manner, as described below.There is only one bulb in the rear courtesy light which can be switched on or off using the relevant switch or through a delay timer as described below.The courtesy light operation is timed according to a logic managed by the body computer:- when any door is opened, both the front spotlights and the rear courtesy light come on for 3 minutes. The timer is reactivated whenever the door is opened;- when all the doors are closed; the lights stay on for a further 10 seconds with the key off. This time is interrupted if the key is moved to key on position: in this case, the courtesy lights are turned off immediately.- When all the doors are closed at key-on the courtesy lights are immediately switched off.- when the key is extracted, both the front spotlights and the rear courtesy light are turned on and a 10 second timer is activated.- all the courtesy lights are turned off at the door lock control;- at the door release command, both the front spotlights and the rear courtesy light are turned on and a 10 second timer is activated.- If the inertia switch is operated the courtesy lights come on for 15 minutes.The switching on or off takes place gradually (dimmer) with the cycle lasting 2 seconds.The power supply to all the courtesy lights is governed by a battery voltage control logic: with the key off when any door or the boot is opened, a time of 15 seconds is set. After this, all the courtesy lights are deactivated.If one or more doors are open, this is shown on the instrument panel display; the warning light remain on until all the vehicle doors and boot lid are properly shut. If a given speed limit is exceeded, this is also signalled by means of a buzzer.

FUNCTIONAL DESCRIPTION - COURTESY LIGHTS - Fiat GRANDE PUNTO 1.4 16v

The Body Computer M1 receives "door open" input signals at pin 57 (driver''s front door) pin 41 (left rear door) pin 56 (front passenger door) and pin 55 (right rear door) of connector A of M1.Both the front courtesy light G10 and the rear courtesy light G20 receive a power supply from the direct line protected by fuse F53 located on Body Computer M1.Front courtesy light G10 is supplied from Body Computer M1 in accordance with the strategy described previously from pin 25 of connector E, while the timed command analogue signal is received from pin 3 of connector C.Front courtesy light G20 is also supplied from Body Computer M1 in accordance with the strategy described previously from pin 26 of connector E, while the timed command analogue signal is received from pin 5 of connector E.Body Computer M1 - connector G - is supplied directly from the battery from a line protected by maxifuse F2 of engine compartment control unit B1. It is ignition-operated (INT) at pin 32 of connector D. Pin 10 of connector H of M1 supplies a reference earth to the Body Computer.Body Computer M1 is connected via the CAN line to instrument panel E50, to which it sends a signal that turns on the door open warning light, where necessary, and activates the buzzer to give an acoustic signal.