Fiat ULYSSE 2.2 16V JTD fino a 04/03 – ABS – – MY 2005 – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

获取访问所有汽车的接线图

ABS WIRING DIAGRAM Fiat ULYSSE 2.2 16V JTD fino a 04/03

获取访问所有汽车的接线图

Components - ABS - Fiat ULYSSE 2.2 16V JTD fino a 04/03

Component code	Description	Reference to the assembly
A001	BATTERY	-
B001	ENGINE COMPARTMENT JUNCTION UNIT
B005	MAXI FUSE BOX	-
B098	ADDITIONAL FUSE BOX	-
C010	LEFT FRONT EARTH	-
C011	RIGHT FRONT EARTH	-
C012	ABS FRONT EARTH	-
C020	PASSENGER SIDE DASHBOARD EARTH	-
D001	FRONT/DASHBOARD COUPLING	-
D006	FRONT/REAR COUPLING	-
E050	INSTRUMENT PANEL
H001	Ignition switch
I030	BRAKE PEDAL SWITCH
I031	CLUTCH PEDAL SWITCH	-
I035	Safety switch on brake pedal for cruise control	-
K020	LEFT BRAKE PAD WEAR SENSOR (SWITCH)
K021	RIGHT BRAKE PAD WEAR SENSOR (SWITCH)
K025	BRAKE FLUID LEVEL SENSOR (SWITCH)	-
K070	LEFT FRONT WHEEL SENSOR FOR ABS
K071	RIGHT FRONT WHEEL SENSOR FOR ABS
K075	LEFT REAR WHEEL SENSOR FOR ABS
K076	RIGHT REAR WHEEL SENSOR FOR ABS
M001	BODY COMPUTER
M010	ENGINE MANAGEMENT CONTROL UNIT
M050	ABS CONTROL UNIT
M140	WARNING LIGHTS AND MILOMETER CONTROL UNIT (NSO)	-
R010	MULTIPLE DIAGNOSTIC COUPLING	-

ABS COMPONENTS LOCATION Fiat ULYSSE 2.2 16V JTD fino a 04/03

获取访问所有汽车的接线图

Component code	Description	Reference to the assembly
A001	BATTERY	-
B001	ENGINE COMPARTMENT JUNCTION UNIT
B005	MAXI FUSE BOX	-
B098	ADDITIONAL FUSE BOX	-
C010	LEFT FRONT EARTH	-
C011	RIGHT FRONT EARTH	-
C012	ABS FRONT EARTH	-
C020	PASSENGER SIDE DASHBOARD EARTH	-
D001	FRONT/DASHBOARD COUPLING	-
D006	FRONT/REAR COUPLING	-
E050	INSTRUMENT PANEL
H001	Ignition switch
I030	BRAKE PEDAL SWITCH
I031	CLUTCH PEDAL SWITCH	-
I035	Safety switch on brake pedal for cruise control	-
K020	LEFT BRAKE PAD WEAR SENSOR (SWITCH)
K021	RIGHT BRAKE PAD WEAR SENSOR (SWITCH)
K025	BRAKE FLUID LEVEL SENSOR (SWITCH)	-
K070	LEFT FRONT WHEEL SENSOR FOR ABS
K071	RIGHT FRONT WHEEL SENSOR FOR ABS
K075	LEFT REAR WHEEL SENSOR FOR ABS
K076	RIGHT REAR WHEEL SENSOR FOR ABS
M001	BODY COMPUTER
M010	ENGINE MANAGEMENT CONTROL UNIT
M050	ABS CONTROL UNIT
M140	WARNING LIGHTS AND MILOMETER CONTROL UNIT (NSO)	-
R010	MULTIPLE DIAGNOSTIC COUPLING	-

The vehicle is fitted with an ABS braking system which prevents the wheels from locking during braking, makes the best possible use of the grip conditions available and keeps the vehicle as easy as possible to control during emergency braking.The ABS is an additional part of the basic braking system; it is disabled if there is a problem, with the braking system working the same way as for a vehicle without ABS.The advantage of ABS over conventional systems is that it makes it possible to maintain maximum manoeuvrability even when braking hard in poor grip conditions, preventing the wheels from locking.The system is completed by the EBD system (Electronic Brake Distributor) which distributes the brake force by means of the ABS sensors and control unit.The "ABS failure" warning light and the "minimum brake fluid level" warning light coming on simultaneously with the engine running means that there is a problem with the EBD system; in this case, the wheels could lock during sharp braking.The "ABS failure" warning light coming on by itself with the engine running usually means that there is a problem with the ABS only.In this case, the braking system will work properly, just without the anti-lock function.The operation of the EBD system may also be affected under these circumstances.If the "minimum brake fluid level" warning light only comes on, this means that the hydraulic system fluid level is too low.On this version, the system is only available in the basic configuration.If the vehicle in question is equipped with the ESP function and the additional TC/ASR, MBA/HBA and MSR functions,The basic ABS system components are:the electronic control unit;the four sensors which detect the rotation speed of each wheel (ABS sensors).

The ABS function is managed by ABS control unit M050.Control unit M050 is supplied at connector A from engine compartment control unit B001:- at pin 2, by a line protected by fuse MF02 from pin 2 of connector D;- at pin 3, by a line protected by fuse MF03 from pin 3 of connector D;- at pin 18, by a line protected by fuse F07 from pin 3 of connector F;Control unit M050 communicates via the CAN line (pin 26 and 15, 14 and 25 connector A) with the body computer node M001) (pins 2 and 4, 25 and 27 connector E, pins 8 and 10 connector D), with engine control unit M010 (pins A3 and A4 connector A), with instrument panel E050 (pins 6 and 12), with warning light and odometer control unit M140 (pins 2 and 5) and with engine compartment control unti B001 (pins 11 and 12 connector F).Control unit M050 (pins 16-5, 9-10, 6-17, 8-19 connector A respectively) controls the speed of each wheel via left front wheel sensor K070 (pin 1 and 2), right front wheel sensor K071 (pins 1 and 2), left rear wheel sensor K075 (pins 1 and 2) and right rear wheel sensor K076 (pins 1 and 2).Left brake wear sensor K020 and right brake wear sensor K021 (pin 1 connector A) send an earth signal to control unit M050 (pin 22 connector A).Brake fluid level signal sensor K02 (pin 1) is connected to M050 (pin 21 connector A), which sends signals (via the CAN line) to control units E050 and M140.Instrument panel E050 (pin 13) and warning light and odometer control unit M140 (pin 4) are supplied by body computer node M001 (pin 6 connector D) via a line protected by fuse F14.767There is a second "redundant" switch on the brake pedal used, in particular, by the engine management control unit and the ABS control unit. The "basic" switch (I030) is the "normally open" type (when the pedal is pressed, the switch closes), whilst the "redundant" switch (I035) is the "normally closed" type (when the pedal is pressed, the switch contact opens): the system checks the consistency of the "pedal pressed" information in this way.The brake pedal pressed signal reaches brake pedal switch I030:- pin 1 is connected via a line protected by fuse F31 to pin G31 of connector G of supplementary fuse box B098;- pin 2 is connected to pin 4 of connector B of body computer node M001 and with pin 20 of connector A of control unitM050.Pin 1 of redundant switch I035 is connected to pin 20 of connector F of engine compartment junction unit B001 via a line protected by fuse F06, while pin 2 is connected to pin E4 of connector A of control unitM010.Pin 2 of clutch pedal switch I031 is connected to pin E3 of connector A of control unit M010 and pin 1 is connected to pin 9 of connector B of M001.Control unit M050 (pin 11 connector A) is equipped with a self-diagnostic function: The control unit autodiagnostic data can be read by connecting to connector R010 (pin 12).