CRUISE CONTROL – Hyundai Tiburon GT 2006 – SYSTEM WIRING DIAGRAMS

CRUISE CONTROL

Cruise Control Wiring Diagram for Hyundai Tiburon GT 2006

List of elements for Cruise Control Wiring Diagram for Hyundai Tiburon GT 2006:

• "cruise" ind on
• (2.0l)
• (2.0l) (2.7l)
• (2.0l: on brake pedal bracket) (2.7l: left side of dash) stop lamp switch
• (2.7l)
• (on left side of engine compartment) (2.0l) g20
• (or pnk)
• (tcm: behind left side of dash) pcm/tcm
• (w/o esc) (w/ esc)
• 5 m/t
• A/t
• A/t & 6 m/t
• Acc
• Actuator clutch
• Amp 2
• Bcm-im
• Bcm-jm
• Bcm-km
• Body control module box (behind left side of dash)
• Burglar alarm relay (under left side of dash)
• C01
• C101
• C33-2
• C36-1
• Cancel
• Clock spring
• Cruise clutch pedal position switch (near clutch pedal bracket)
• Cruise control module (on right side of firewall, behind strut tower)
• Cruise ind
• Cruise remote control switch
• Data link connector (below left side of dash)
• E/r box (in left front corner of engine compartment behind battery)
• Fuse 13 15a
• Fuse 16 10a
• Fuse 17 10a
• Fuse 3 10a
• G15 (on left front corner of engine compartment)
• G20 (2.0l) (on left side of engine compartment)
• G23 (2.7l) (behind left side of dash)
• Ground
• Hall ic
• Hot at all times
• Hot in on or start
• Ignition switch
• Instrument cluster
• Joint connector c41 c141 (2.0l: behind crash pad)
• Joint connector m34 (left side of dash)
• Lock
• M/t
• M01-3
• M10-1
• M62-2
• Main switch
• Main/command sw in
• Micom
• Multi gauge unit
• Multi- function switch (under steering column)
• Nca
• O/d control
• Park/neutral input
• Pnk
• Red
• Resume/ accel
• Set ind
• Set/ coast
• Speed sensor
• Start
• Start relay
• Steering wheel
• Stoplamp sw input
• Switch input
• Transaxle range switch (2.0l: on top left side of transaxle) (2.7l: on top of transaxle)
• Vehicle speed input
• Vehicle speed sensor (on top of transaxle)
• W/ esc
• W/o esc