CRUISE CONTROL
Cruise Control Wiring Diagram for Hyundai Tucson GLS 2005
List of elements for Cruise Control Wiring Diagram for Hyundai Tucson GLS 2005:
- "cruise" ind on
- (2.0l)
- (2.0l: on brake pedal bracket) (2.7l: left side of dash) stop lamp switch
- (2.7l)
- (2.7l) (2.0l)
- (left side of eng compt)
- (left side of engine compt)
- (under left side of dash) pcm (2.0l) tcm (2.7l)
- 5 (auto) 8 (man)
- A/c control module
- A/t
- Accel/ resume
- Actuator clutch
- Anti-lock brakes system
- Burglar alarm relay (in i/p relay box)
- C130-2
- C24-1
- C35 c135
- Cancel
- Clock spring
- Cruise clutch pedal position switch (near clutch pedal bracket)
- Cruise control module behind strut tower)
- Cruise ind
- Cruise remote control switch
- Data link connector (below left side of dash)
- Etacm (under center console)
- F12
- Fuse 20 10a
- Fuse 31 15a
- Fuse 33 10a
- Fuse 6 10a
- G21 (2.7l) g27 (2.0l)
- G21 g27
- G27 (left side of engine compt)
- Ground
- Hall ic
- Hot at all times
- Hot in on or start
- Hot in start
- I/p junction box (under left side of dash)
- I/p-a
- I/p-c
- I/p-e
- Instrument cluster
- J/c (lower right side of dash)
- J/c c23 c123 (right side of blower motor)
- J/c c35 (2.7l) c135 (2.0l) (lower right side of dash)
- J/c m08 (under left side of dash)
- J/c m17 (under left side of dash)
- M/t
- M13-1
- M13-3
- M15-1
- M15-3
- M20-3
- M41-2 (auto) m43-2 (man)
- Main switch
- Multi- function switch
- Nca
- O/d control
- Park/neutral input
- Pnk
- Pwr source
- Red
- Set ind
- Set ind on
- Set/ coast
- Starting circuit
- Stoplamp sw input
- Switch input
- Tire pressure monitoring module (under rear of center console)
- Transaxle range switch (2.0l: on top left side of transaxle) (2.7l: on top of transaxle)
- Vehicle speed input
- Vehicle speed sensor (on top of transaxle)
- W/ b/ alarm
- W/o b/ alarm