ANTI-THEFT
Forced Entry Wiring Diagram for Ford Explorer Sport Trac 2008
List of elements for Forced Entry Wiring Diagram for Ford Explorer Sport Trac 2008:
- (at rear of left front door) driver side door lock actuator
- (in window regulator jumper harness, near breakout to c339) s313
- (in window regulator jumper harness, near breakout to c339) s314
- 1/2
- 3/4
- 5/6
- 7/8
- 9/0
- All lock relay
- All unlock relay
- C2280a
- C2280b
- Cntrl
- Driver side door lock switch
- Driver side front door ajar switch (at rear of left front door)
- Driver side rear door ajar switch (at rear of left rear door)
- Driver unlock relay
- Fuse 20a
- G300 (behind left kick panel)
- G301 (base of left "b" pillar)
- G303 (at right "c" pillar)
- Hot at all times
- Hsd
- Interior lights system
- Key pad switch assembly
- Left rear door lock actuator (at rear of left rear door)
- Lock
- Off
- Passenger side door lock actuator (at rear of right front door)
- Passenger side door lock switch
- Passenger side front door ajar switch (at rear of right front door)
- Passenger side rear door ajar switch (at rear of right rear door)
- Right rear door lock actuator (at rear of right rear door)
- S306 (in window regulator jumper harness, near breakout to g300)
- S308 (in window regulator jumper harness, near breakout to g300)
- S501
- S600
- Sense
- Smart junction box (sjb) (behind left side of dash)
- Unlock
Passive Anti-theft Wiring Diagram for Ford Explorer Sport Trac 2008
List of elements for Passive Anti-theft Wiring Diagram for Ford Explorer Sport Trac 2008:
- Acc
- Anti theft
- Autolamp/ sunload sensor (behind glove box)
- C2280c
- Cdc34
- Computer data lines system
- Epats gnd
- Epats rx
- Epats tx
- Fuse 10a
- G302 (base of right "b" pillar)
- Hot at all times
- Hs can+
- Hs can-
- Ignition switch
- Instrument cluster (ic)
- Off
- Passive anti-theft transceiver (on steering column)
- Rf gnd
- Rf pwr
- Rrt25
- Run
- Run/st
- Rx sig
- S219
- S223
- Smart junction box (sjb) (behind left side of dash)
- Start
- Tx sig
- Vrt23
- Vrt24
