CRUISE CONTROL – GMC Savana G2500 1999 – SYSTEM WIRING DIAGRAMS

CRUISE CONTROL

4.3L

4.3L VIN W, Cruise Control Wiring Diagram for GMC Savana G2500 1999

List of elements for 4.3L VIN W, Cruise Control Wiring Diagram for GMC Savana G2500 1999:

• (4.3l)
• (5.0l, 5.7l)
• (7.4l)
• A12
• A13
• A14
• A15
• Auto cruise
• Brake fuse 18 10a
• Cruise control module (front left of engine compartment)
• Cruise control switch
• Cruise fuse 6 10a
• Cruise on input
• Cruise signal
• Electronic brake control module (on left frame rail near center of vehicle)
• Exterior light system
• G110 (left front of engine) g119 (right front of engine) g117 (right rear of engine)
• Ground
• Hot at all times
• Hot in run
• I/p fuse block (left lower kick panel)
• Ignition
• Off
• Pnk
• R/a
• Resume/accel sig
• S/c
• S114 (i/p harness, behind i/p fuse block)
• S122
• S154 (engine harness, 4 cm from ignition coil breakout)
• S210
• S239 (i/p harn, 10 cm from radio breakout)
• S254
• Set/coast sig
• Sound system
• Speed sensor input
• Speed signal
• Stop fuse 1 20a
• Stoplamp sw input
• Tcc/stoplamp switch (on brake pedal support)
• Vcm signal
• Vehicle control module (vcm) (left side of engine compt)
• Vehicle speed sensor (vss) (left side of transmission)
• Vss high
• Vss low

5.0L

5.0L VIN M, Cruise Control Wiring Diagram for GMC Savana G2500 1999

List of elements for 5.0L VIN M, Cruise Control Wiring Diagram for GMC Savana G2500 1999:

• (4.3l)
• (5.0l, 5.7l)
• (7.4l)
• A12
• A13
• A14
• A15
• Auto cruise
• Brake fuse 18 10a
• Cruise control module (front left of engine compartment)
• Cruise control switch
• Cruise fuse 6 10a
• Cruise on input
• Cruise signal
• Electronic brake control module (on left frame rail near center of vehicle)
• Exterior light system
• G110 (left front of engine) g119 (right front of engine) g117 (right rear of engine)
• Ground
• Hot at all times
• Hot in run
• I/p fuse block (left lower kick panel)
• Ignition
• Off
• Pnk
• R/a
• Resume/accel sig
• S/c
• S114 (i/p harness, behind i/p fuse block)
• S122
• S154 (engine harness, 4 cm from ignition coil breakout)
• S210
• S239 (i/p harn, 10 cm from radio breakout)
• S254
• Set/coast sig
• Sound system
• Speed sensor input
• Speed signal
• Stop fuse 1 20a
• Stoplamp sw input
• Tcc/stoplamp switch (on brake pedal support)
• Vcm signal
• Vehicle control module (vcm) (left side of engine compt)
• Vehicle speed sensor (vss) (left side of transmission)
• Vss high
• Vss low

5.7L

5.7L VIN R, Cruise Control Wiring Diagram for GMC Savana G2500 1999

List of elements for 5.7L VIN R, Cruise Control Wiring Diagram for GMC Savana G2500 1999:

• (4.3l)
• (5.0l, 5.7l)
• (7.4l)
• A12
• A13
• A14
• A15
• Auto cruise
• Brake fuse 18 10a
• Cruise control module (front left of engine compartment)
• Cruise control switch
• Cruise fuse 6 10a
• Cruise on input
• Cruise signal
• Electronic brake control module (on left frame rail near center of vehicle)
• Exterior light system
• G110 (left front of engine) g119 (right front of engine) g117 (right rear of engine)
• Ground
• Hot at all times
• Hot in run
• I/p fuse block (left lower kick panel)
• Ignition
• Off
• Pnk
• R/a
• Resume/accel sig
• S/c
• S114 (i/p harness, behind i/p fuse block)
• S122
• S154 (engine harness, 4 cm from ignition coil breakout)
• S210
• S239 (i/p harn, 10 cm from radio breakout)
• S254
• Set/coast sig
• Sound system
• Speed sensor input
• Speed signal
• Stop fuse 1 20a
• Stoplamp sw input
• Tcc/stoplamp switch (on brake pedal support)
• Vcm signal
• Vehicle control module (vcm) (left side of engine compt)
• Vehicle speed sensor (vss) (left side of transmission)
• Vss high
• Vss low