WARNING SYSTEMS – GMC Savana G2500 2006 – SYSTEM WIRING DIAGRAMS

WARNING SYSTEMS

Warning Systems Wiring Diagram for GMC Savana G2500 2006

List of elements for Warning Systems Wiring Diagram for GMC Savana G2500 2006:

• (behind left kick panel) g302
• (behind left kick panel) g303
• A (w/o pwr driver seat) (w/ pwr driver seat)
• A10
• A11
• A12
• B10
• B11
• B12
• Battery
• Body control module (bcm) (behind lower right side of dash)
• Brake ind
• Brake warn ind ctrl
• Chime module (behind center of dash)
• Class 2 (ebcm)
• Class 2 (sdm)
• Class 2 serial data
• Connector (dlc) (partial) (under left side of dash)
• D10
• Data link
• Exterior lights system
• G347 (bottom of left "b" pillar)
• Ground
• Headlamp & panel dimmer switch
• Headlamps on signal
• Hot at all times
• Ign
• Ignition key alarm switch (inside top of steering column)
• Inflatable restraint sensing & diagnostic module (sdm) (under left front seat)
• Instrument panel cluster (ipc)
• Key in switch signal
• Left front seat belt switch
• Left seat belt switch signal
• Left turn signal
• Logic
• Nca
• Optional
• Park brake sw signal
• Park brake switch (under left side of dash)
• Power brake (p/b) booster fluid flow alarm switch (near power steering pump, in outlet hose)
• Power brake (p/b) booster fluid pressure alarm switch (near power brake booster, in booster inlet hose)
• Radio
• Radio bat fuse 1 15a
• Right turn signal
• S247
• S248
• S264
• S304 (w/ pwr driver seat)
• Seat belt ind
• Serial data
• Sp200 (in dash wiring harness, 10 cm from underhood pass-through grommet breakout)
• Sp347
• Tan
• Underhood fuse block (on left side of engine compartment)
• W/ radio
• W/o radio