WARNING SYSTEMS
Warning Systems Wiring Diagram for Nissan Quest 2006
List of elements for Warning Systems Wiring Diagram for Nissan Quest 2006:
- Air bag diagnosis sensor unit (behind right end of dash)
- B7 (at left "b" pillar)
- Bat (f/l)
- Body control module (bcm) (behind left side of dash)
- Buckle sw
- Buzzer
- Can-h
- Can-l
- Combi sw input 1
- Combi sw input 2
- Combi sw input 3
- Combi sw input 4
- Combi sw input 5
- Combi sw output 1
- Combi sw output 2
- Combi sw output 3
- Combi sw output 4
- Combi sw output 5
- Combination meter
- Combination switch
- Computer data lines system
- Door ind
- Door sw (dr)
- E30
- Fuse & fusible link block (at left front of engine compartment)
- Fuse 10a
- Fuse 15a
- Fuse block (j/b) (behind left side of dash)
- Fusible link j 50a
- Gnd
- Hot at all times
- Hot in on or start
- Ign sw
- Input 1
- Input 2
- Input 3
- Input 4
- Input 5
- Key sw
- Key switch
- Left front door switch (at left "b" pillar)
- Left seat belt buckle switch (in driver side seat belt buckle assembly)
- M18
- M19
- M20
- M23
- M24
- M35
- M61 (behind right end of dash)
- Output 1
- Output 2
- Output 3
- Output 4
- Output 5
- P/ warn check
- Pnk
- Red
- Seat belt
- Seat belt ind
- Tire pressure ind
- Tire pressure warning check connector (behind lower center of dash)
- Unified meter control unit