SUPPLEMENTAL RESTRAINTS – Chevrolet Cavalier 2005 – SYSTEM WIRING DIAGRAMS

SUPPLEMENTAL RESTRAINTS

Supplemental Restraints Wiring Diagram for Chevrolet Cavalier 2005

List of elements for Supplemental Restraints Wiring Diagram for Chevrolet Cavalier 2005:

• (below left front seat, on frame rail) g304
• (in body harness, 143 cm from left tail/stoplight connector) s330
• (on center of front bumper, behind fascia) inflatable restraint front end discriminating sensor
• A10
• A11
• A12
• A13
• A14
• A15
• A16
• A17
• A18
• Air bag fuse 15a
• Air bag indicator
• Body computer module (bcm) (behind lower left side of dash)
• Case ground
• Class 2 (sdm)
• Data link connector (dlc) (below left side of dash)
• Electronic brake control module (ebcm) (next to master cylinder)
• High control
• Hot in run, bulb test or start
• I/p fuse block (behind lower left side of dash)
• Ign
• Ignition
• Inflatable restraint i/p module (above glove box)
• Inflatable restraint sensing & diagnostic module (under right front seat)
• Inflatable restraint steering wheel module (under horn pad)
• Inflatable restraint steering wheel module coil (under steering wheel)
• Instrument panel cluster (ipc)
• Left front inflatable restraint side impact module (on driver seat side)
• Left inflatable restraint side impact sensor (coupe: in left front door sedan: at left "b" pillar)
• Left signal
• Left voltage
• Low control
• Nca
• Powertrain control module (pcm) (on right rear of engine compartment)
• Reference
• Right front inflatable restraint side impact module (on driver seat side)
• Right inflatable restraint side impact sensor (coupe: in right front door sedan: at right "b" pillar)
• Right signal
• Right voltage
• Seat belt switch (in driver seat belt assembly)
• Serial data class 2
• Shorting bar
• Signal
• Tan