ENGINE PERFORMANCE – Nissan Xterra PRO-4X 2013 – SYSTEM WIRING DIAGRAMS

ENGINE PERFORMANCE

4.0L

4.0L, Engine Performance Wiring Diagram (1 of 5) for Nissan Xterra PRO-4X 2013

List of elements for 4.0L, Engine Performance Wiring Diagram (1 of 5) for Nissan Xterra PRO-4X 2013:

• 15p
• 41g
• Af-h1 (r)
• Af-h2 (l)
• Avcc1 tps
• Batt
• E160
• E24
• Ecm (right rear of engine compt)
• Evap
• Evap canister purge volume control solenoid valve (top left side of engine)
• F16 (top left of engine)
• F201 f44
• F26 f225
• F32
• F54
• Fpr
• Fuel injectors 1, 3 & 5 (top right of engine)
• Fuel injectors 2, 4 & 6 (top left of engine)
• Fuse 10a
• Fuse block (j/b) (right side of dash)
• Gnd
• Gnd-a tps
• Hot in on or start
• Ign 1
• Ign 2
• Ign 3
• Ign 4
• Ign 5
• Ign 6
• Ignition coil 1 (w/ power transistor) (on right cylinder head)
• Ignition coil 2 (w/ power transistor) (on left cylinder head)
• Ignition coil 3 (w/ power transistor) (on right cylinder head)
• Ignition coil 4 (w/ power transistor) (on left cylinder head)
• Ignition coil 5 (w/ power transistor) (on right cylinder head)
• Ignition coil 6 (w/ power transistor) (on left cylinder head)
• Inj 1
• Inj 2
• Inj 3
• Inj 4
• Inj 5
• Inj 6
• M31 e152
• Motor1
• Motor2
• Motrly
• Nca
• O2hrl
• O2hrr
• Pnk
• Red
• Spark plug
• Ssoff
• Tcv-pos
• Tps1
• Tps2
• Vias
• Vias control solenoid valve
• Vmot

4.0L, Engine Performance Wiring Diagram (2 of 5) for Nissan Xterra PRO-4X 2013

List of elements for 4.0L, Engine Performance Wiring Diagram (2 of 5) for Nissan Xterra PRO-4X 2013:

• (left rear of engine) condenser 1
• Clutch pedal position switch
• E119
• E121
• E122
• E24
• Ecm relay
• Electric throttle control actuator (on throttle body)
• F14
• F250
• F32
• F67
• Fuel pump relay
• Fuse 15a
• Fuse 20a
• Hot at all times
• Hot in on or start
• Hot w/ ignition relay energized
• Ipdm e/r (right rear of engine compt)
• Knock sensor (bank 1) (top of engine)
• Knock sensor (bank 2) (top of engine)
• Nca
• Pnk
• Red
• Sensor 1
• Sensor 2
• Shield
• Throttle control motor
• Throttle control motor relay
• Throttle position sensor

4.0L, Engine Performance Wiring Diagram (3 of 5) for Nissan Xterra PRO-4X 2013

List of elements for 4.0L, Engine Performance Wiring Diagram (3 of 5) for Nissan Xterra PRO-4X 2013:

• (left side of engine compt, near air intake box) mass airflow (maf) sensor
• (rear of left cylinder head) camshaft position sensor (phase) (bank 2)
• (rear of right cylinder head) camshaft position sensor (phase) (bank 1)
• (under left rear of vehicle) evap control system pressure sensor
• 10c
• 11c
• 12c
• A/t
• Accelerator pedal position (app) sensor (under left side of dash)
• Brake pedal position switch
• C1 e41
• Crankshaft position sensor (pos) (right rear of engine)
• E24
• F225
• F26
• Heated oxygen sensor 2 (bank 1) (on right exhaust pipe)
• Heated oxygen sensor 2 (bank 2) (on left exhaust pipe)
• Iat sensor
• Intake valve timing control solenoid valve (bank 1) (right front of engine)
• Intake valve timing control solenoid valve (bank 2) (left front of engine)
• M/t
• Nca
• Pnk
• Red
• Sensor 1
• Sensor 2

4.0L, Engine Performance Wiring Diagram (4 of 5) for Nissan Xterra PRO-4X 2013

List of elements for 4.0L, Engine Performance Wiring Diagram (4 of 5) for Nissan Xterra PRO-4X 2013:

• (in fuel tank) fuel pump & fuel level sensor unit
• (rear of engine) engine coolant temperature sensor
• 13c
• 14c
• 28c
• 56g
• 66g
• 67g
• A/t
• Aps1
• Aps2
• Ascd sw
• Avcc
• Avcc2
• Avcc2-tprs
• Bncsw
• Brake
• Can-h
• Can-l
• Cdcv
• Combination meter
• Computer data lines system
• Cruise control system
• E15 (right front of engine compt)
• E152
• E16
• E201
• E24
• E40
• E41
• E9 (left side of engine compt)
• Ecm (right rear of engine compt)
• Engine oil temperature sensor
• F14
• Ftprs
• Fuel level sensor
• Fuel pump
• Fuel tank temperature sensor
• Gnd
• Gnd a2
• Gnd-a
• Gnda ftprs
• Gnda-ascds
• Ignsw
• K-line
• M/t
• M31
• M57 (left a-pillar)
• Malfunction ind lamp (mil)
• Neut
• Park/neutral position (pnp) switch (m/t) (top of transmission)
• Pnk
• Red
• Unified meter control unit (w/ information display)
• Vbr

4.0L, Engine Performance Wiring Diagram (5 of 5) for Nissan Xterra PRO-4X 2013

List of elements for 4.0L, Engine Performance Wiring Diagram (5 of 5) for Nissan Xterra PRO-4X 2013:

• (front of engine compt) refrigerant pressure sensor
• (right side of engine compt) battery current sensor
• 26c
• 27c
• A/t
• Af+1 (r)
• Af+2 (l)
• Af-1 (r)
• Af-2 (l)
• Air fuel (a/f) ratio sensor 1 (bank 1) (right rear of engine)
• Air fuel (a/f) ratio sensor 1 (bank 2) (left side of engine)
• Avcc (pdpress)
• Avcc (pspress)
• Avcc1-cursen
• Avcc2-pos tcv pos
• Cursen
• Cvtcl
• Cvtcr
• E119
• E160
• E24
• E41
• Ecm (right rear of engine compt)
• Evap canister vent control valve (under left rear of vehicle, on evap canister)
• Exterior lights system
• F14
• F32
• F57
• Fuse 10a
• Fuse 15a
• Fuse block (j/b) (right side of dash)
• Gnd-a
• Gnd-o2
• Gnd-pos tcv pos
• Gnda-cursen
• Gnda-knk1 knk2
• Gnda-pdpres
• Gnda-pspres
• Hot at all times
• Hot w/ ignition relay energized
• Intake manifold runner control valve motor
• Intake manifold runner control valve position sensor
• Ipdm e/r (right rear of engine compt)
• Knk1
• Knk2 (l)
• M/t
• Nca
• O2srl
• O2srr
• Pdpress
• Phase (lh)
• Phase (rh)
• Pnk
• Pos
• Power steering pressure sensor (right front of engine)
• Pspres
• Qa+
• Qa-gnda-ta1
• Red
• Stop lamp switch
• Stop lamp switch (on bracket, above brake pedal)
• Ta1
• Tcv1
• Tcv2
• To1
• Vtcv