ENGINE PERFORMANCE
2.4L
2.4L, Engine Performance Wiring Diagrams (1 of 2) for Nissan 240SX 1998
https://portal-diagnostov.com/license.html
https://portal-diagnostov.com/license.html
Automotive Electricians Portal FZCO
Automotive Electricians Portal FZCO List of elements for 2.4L, Engine Performance Wiring Diagrams (1 of 2) for Nissan 240SX 1998:
- (behind left kick panel,
- (for consult)
- (left kick panel) g200
- (right kick panel) g203
- (under left dash panel, near fuse box cover) data link connector (for gst)
- 5th position switch (right side of trans- mission)
- A/t
- Above fuse block)
- Absolute pressure sensor (right side of eng compt)
- Air condi- tioning system
- Closed
- Cooling fans system
- Crankshaft position sensor (on transmission housing, facing flywheel gear teeth)
- Data link connector
- Defogger
- Eccs control module (ecm) (behind right kick panel)
- Eccs relay (behind right kick panel)
- Egr temper- ature sensor (on right side of eng)
- Engine coolant temperature sensor (top right front of eng)
- Evap canister purge volume control valve (right side of eng)
- Evap control system pressure sensor (under right rear of vehicle)
- Fuel tank gauge unit (on top of fuel tank)
- Fuse 7.5a
- Fuse & fusible link block 2
- G106 (behind left headlamp)
- G107 (behind right headlamp)
- G407 (center rear of trunk)
- Headlights system
- Hot at all times
- Instrument cluster system
- Intake air temperature sensor (left front corner of eng compt, in air duct housing)
- Knock sensor (on right side of eng)
- M/t
- Mass air flow sensor (next to air cleaner box)
- Nca
- Of steering column)
- Open wide
- Pnk
- Power steering oil pressure switch (left side of eng)
- Red
- Resistor (front of eng, behind radiator shroud)
- System
- Throttle position sensor (on throttle body assembly)
- Throttle position switch (on throttle body assembly, integral to throttle position sensor)
- Transmission control module (behind dash, left
2.4L, Engine Performance Wiring Diagrams (2 of 2) for Nissan 240SX 1998
https://portal-diagnostov.com/license.html
https://portal-diagnostov.com/license.html
Automotive Electricians Portal FZCO
Automotive Electricians Portal FZCO すべての配線図にアクセスする車List of elements for 2.4L, Engine Performance Wiring Diagrams (2 of 2) for Nissan 240SX 1998:
- (behind right
- 1o1
- 7.50a
- 7.5a
- A/t
- Acc
- Air conditioning system
- Cam- shaft position sensor
- Check connec- tor
- Condenser (left front of eng, taped to distributor breakout)
- Distributor
- Eccs control module (ecm) (behind right kick panel)
- Egrc solenoid valve (top rear of eng)
- Electronic speedo- meter
- Evap canister purge control solenoid valve (on top right side of eng)
- Evap canister vent control valve (above right rear tire)
- Front heated oxygen sensor (on exhaust manifold)
- Fuel injectors
- Fuel pump (in fuel tank)
- Fuel pump relay (behind left kick panel)
- Fuse
- Fuse 10a
- Fuse 15a
- Fuse 7.5a
- Fuse block
- G107
- G114 (left rear of eng)
- G200 (left kick panel)
- G407 (center rear of trunk)
- Headlamp)
- Hot at all times
- Hot in start
- Hot in start or on
- Iacv- air regulator (right rear of eng)
- Iacv-acc valve (right rear of eng)
- Ignition coil
- Ignition switch
- Instrument cluster
- M/t
- M12
- Malfunction indicator lamp
- Map/ baro switch sol valve (right side of eng compt)
- Nca
- Neutral position switch (right rear of trans- mission)
- Off
- Power transistor
- Rear heated oxygen sensor (after catalytic converter)
- Red
- Smj
- Start
- Vacuum cut valve by-pass valve (on evap purge line, between fuel tank & evap canister)
- Vehicle speed sensor (on right rear of transmission)