ПРЕДУПРЕЖДАЮЩИЕ СИСТЕМЫ
Электросхема предупреждающей системы для Buick LeSabre Custom 2004
Электросхема предупреждающей системы для Buick LeSabre Custom 2004 - Список элементов:
- (in i/p harness, 30.5 cm from i/p integration module breakout) s251
- (on left front of engine compt) electronic brake control module
- A11
- A12
- A14
- A15
- A16
- Battery
- Chck tire pressures
- Class 2 (ibm)
- Class 2 (sdm)
- Class 2 serial data
- Computer data lines system
- Dash integration module (behind right side of dash, under sound insulator)
- Door open
- Driver door lock actuator
- Driver information center (dic)
- Driver's door module (ddm)
- Exterior lights system
- Fasten safety belt ind
- G200 (on left front door pillar)
- Ground
- Headlamp switch
- Heater & a/c control
- Hot at all times
- Ign
- Ign sw fuse 15a
- Ignition key alarm switch (closed w/ key in ignition)
- Inflatable restraint sensing & diagnostic module (sdm) (under rear of center console, mounted to floor pan)
- Instrument panel cluster (ipc)
- Instrument panel integration module (behind left side of dash)
- Key in ignition sw
- Key in signal
- Left seat belt sw
- Left turn
- Left turn ind
- Lf door open switch signal
- Logic
- Low reference
- Nca
- Off
- Park
- Park brake sw
- Park lamp switch
- Park lamp switch on signal
- Power distribution system
- Powertrain control module (in air cleaner housing)
- Radio
- Rear fuse block (under left rear seat)
- Right turn
- Right turn ind
- S208
- S226
- S252 (in i/p harness, 37 cm from i/p integration module breakout)
- Seat belt switch (closed w/seat belt unbuckled) (in seat belt assembly, near floor)
- Serial data
- Sp200
- Tan
- Turn signal/ hazard flasher module (behind left side of dash, above data link connector)
- W/ automatic air conditioning
- W/ manual air conditioning