SUPPLEMENTAL RESTRAINTS — Ford Escape 2001 — SYSTEM WIRING DIAGRAMS

SUPPLEMENTAL RESTRAINTS

Supplemental Restraint Wiring Diagram for Ford Escape 2001

List of elements for Supplemental Restraint Wiring Diagram for Ford Escape 2001:

• (behind bottom left side dash panel) s225
• (behind left side dash panel) s208
• (behind left side dash panel) s215
• (partial) (on lower left side of dash)
• Air bag
• Air bag indicator ctrl
• Air bag sliding contact
• Air bag tone driver
• C2041a
• C2041b
• C220a
• C220b
• C270c
• C270d
• Central junction box (cjb) (below left end of dash)
• Data link connector (dlc)
• Driver air bag feed
• Driver air bag module
• Driver air bag return
• Driver safety belt feed
• Driver safety belt return
• Driver seat seat belt tensioner
• Driver side air bag
• Driver side sensor feed
• Driver side sensor return
• Fuse f2.4 10a
• Fuse f2.5 5a
• Fuse f2.7 10a
• G202 (behind left side dash panel)
• Ground
• Hot in run or start
• Ignition
• Instrument cluster
• Iso bus
• Left side air bag module
• Left side air bag sensor (at base of left "b" pillar)
• Microprocessor
• Nca
• Pass safety belt feed
• Pass safety belt return
• Pass side air bag feed
• Pass side air bag return
• Pass side sensor feed
• Pass side sensor return
• Passenger air bag feed
• Passenger air bag module
• Passenger air bag return
• Passenger seat seat belt tensioner
• Pin shorting bar is engaged when module connector is disconnected from harness (shorting bar is connected between pins: 3-4, 6-7, 15-16, 18-22 & 20-21 conn. c2041a 2-3 & 5-6 conn. c2041b)
• Restraints control module (rcm) (beneath lower center of dash, on transmission tunnel)
• Right side air bag module
• Right side air bag sensor (at base of right "b" pillar)
• S205 (front left side vehicle floor)
• S219 (behind left side, dash panel)
• Shorting bar
• Solid state