SUPPLEMENTAL RESTRAINTS – BMW Z3 1999 – SYSTEM WIRING DIAGRAMS

SUPPLEMENTAL RESTRAINTS

Supplemental Restraints Wiring Diagram for BMW Z3 1999

List of elements for Supplemental Restraints Wiring Diagram for BMW Z3 1999:

• (behind glove box) g201
• (not used)
• (pins 22 thru 33)
• Abbf+
• Abbf-
• Abf+
• Abf-
• Air bag indicator
• Awl
• Belt buckled
• Belt un- buckled
• Body electronics control module (zke iv) (behind glove box)
• Contact ring
• Data link connector (dlc) (partial) (2.5l & 2.8l) (on left rear side of engine compartment) (3.2l) (on right rear side of engine compartment)
• Driver's airbag gas generator
• Driver's seat belt switch (in driver's seat belt buckle)
• Driver's side impact sensor
• Driver's side pyrotechnical belt tensioner (right side of driver's seat)
• Front power distribution box (on left rear corner of engine compartment)
• Fuse 10a
• Fuse 15a
• Fuse 5a
• G302 (below center console)
• Gkbf
• Gkf
• Hot in accy, run & start
• Hot in run & start
• Instrument cluster
• Left side air bag gas generator
• M versions
• Nca
• Note: driver's & passenger's air bags, side air bag generators & pyrotechnical belt tensioners are fitted with shorting bridges, bridges short generator leads together preventing un-intentional triggering of igniter when performing maintenance on air bag system
• Passenger's air bag gas generator
• Passenger's airbag cut-off switch (on early production vehicles this switch may be replaced by a jumper between pins 5-6 & 1-2 respectively)
• Passenger's seat belt switch (in passenger's front seat belt buckle)
• Passenger's side impact sensor
• Passenger's side pyrotechnical belt tensioner (left side of passenger's seat)
• Right side air bag gas generator
• Sbe
• Seat belt indicator
• Seat mat
• Seat occupancy detector (under right front seat)
• Txd
• X10017
• X10018
• X13253
• X16
• X17
• Z3 models