INSTRUMENT CLUSTER
Instrument Cluster Wiring Diagram for Nissan Rogue SL 2008
List of elements for Instrument Cluster Wiring Diagram for Nissan Rogue SL 2008:
- Abs & brake (w/o traction control)
- Abs, slip, vdc off & brake (w/ traction control)
- Air bag ind
- Ambient gnd
- Ambient sens
- Ambient sensor
- Anti-theft system
- Auto anti-dazzling inside mirror (compass)
- B40
- Belt ind
- Body control module (bcm) (behind left end of dash)
- Brake fluid
- Brake fluid level switch
- Buzzer
- Can-h
- Can-l
- Charge ind
- Combination meter
- Computer data lines system
- Cpu
- Cruise ind
- Cvt check ind
- Dr sw as
- Dr sw dr
- Dr sw rl
- Dr sw rr
- Driver side front door switch
- E13
- E21 (left front of engine compt)
- Eps ind
- Fuel level
- Fuel level sensor unit & fuel pump (fuel level sensor) b301 (at fuel tank)
- Fuel level sensor unit (sub)
- Fuse 10a
- Fuse block (j/b) (behind left end of dash)
- High beam ind
- Hot at all times
- Hot in on or start
- Interior lights system
- Ipdm e/r (intelligent power distribution module engine room) (left side of engine compt)
- Key (green)
- Key (red)
- Left rear door switch
- Lock
- M65
- M66
- M76 (behind left side of dash)
- Mal ind
- Manual mode
- Nca
- Not manual mode
- O/d off sw
- Oil pressure switch
- Oil sw
- Parking brake
- Parking brake switch
- Pnk
- Red
- Right rear door switch
- Security ind
- Set ind
- Shift down
- Shift up
- Sound & power tops systems
- Sound systems
- Starting/charging system
- Strg sw down
- Tail lamp ind
- Tire pressure ind
- Transmissions system
- Turn ind
- Unified meter control unit
- Vss (2 pulse)
- Vss (8 pulse)
- Warning systems
- Wash liquid
- Wiper/washer system