СИСТЕМА ПЕРЕДАЧИ ДАННЫХ
Электросхема линии передачи данных CAN для Isuzu Ascender 2003
Электросхема линии передачи данных CAN для Isuzu Ascender 2003 - Список элементов:
- class 2 serial data
- (not used)
- 4.2l
- 5.3l
- A11
- Audio amplifier (in rear compt, behind left side panel)
- Auto a/c manual a/c
- Auxiliary hvac control module (at rear of lower console)
- B11
- Body control module (bcm) (beneath left rear seat, on rear fuse block)
- Cigar fuse 13 20a
- Class 2 serial data
- Data link connector (below dash, above accelerator pedal)
- Driver's door module (on lower part of driver's door switch panel)
- Driver's memory seat module (mounted on underside of driver's seat)
- Electronic brake control module (on inner left frame rail, adjacent to transmission)
- F14
- Front passenger's door module (on lower part of passenger's door switch panel)
- G102 (at left side of engine compartment)
- G201 (near right front of lower console)
- Hot at all times
- Hvac control module (in dash center trim panel, beneath radio)
- Inflatable restraint sensing & diagnostic module (beneath lower console)
- Instrument panel cluster
- Liftgate module (inside liftgate)
- Passenger's memory seat module (mounted on underside of passenger's seat)
- Power distribution system
- Powertrain control module (pcm) (4.2l: on left front of engine) (5.3l: on left front of engine compt)
- Radio
- Splice pack sp201
- Splice pack sp205
- Splice pack sp306
- Tan
- Transfer case shift control module (4wd) (behind left lower dash)
- Underhood fuse block (on left side of engine compt)
- Vehicle communication interface module (under right rear seat)
- W/ bose sound system