VW JETTA 2014 – Anti-lock brake system (ABS) with electronic differential lock (EDL) and traction control system (TCS) and electronic stabilisation program (ESP) . Wiring diagrams, Pin Connector, Location

Wiring Diagram VW JETTA 2014 - Battery - Terminal 15 voltage supply relay 2 - Fuse holder C

A	Battery
B	Starter
J681	Terminal 15 voltage supply relay 2
J682	Terminal 50 voltage supply relay
J935	Converter box
SC13	Fuse 13 on fuse holder C
SC14	Fuse 14 on fuse holder C
SB16	Fuse 16 on fuse holder B
SB23	Fuse 23 on fuse holder B
SB25	Fuse 25 on fuse holder B
SC	Fuse holder C
T9f	9-pin connector
T10i	10-pin connector
1	Earth strap, battery - body
44	Earth point, lower part of left A-pillar
367	Earth connection 2, in main wiring harness
389	Earth connection 24, in main wiring harness
508	Threaded connection (30) on E-box
605	Earth point, on top end of steering column
A217	Positive connection 8 (15a) in dash panel wiring harness
B163	Positive connection 1 (15), in interior wiring harness
*	Gradually discontinued
*2	see applicable current flow diagram for basic equipment
*3	gradual introduction
*4	Only models with Tyre Pressure Monitoring System
*5	Only models with "Low" equipment (AW0)

G44	Rear right speed sensor
G45	Front right speed sensor
G46	Rear left speed sensor
G47	Front left speed sensor
J104	ABS control unit
N133	Rear right ABS inlet valve
N134	Rear left ABS inlet valve
T2ar	2-pin connector
T2as	2-pin connector
T2at	2-pin connector
T2au	2-pin connector
T47	47-pin connector
D146	Connection (rear left speed sensor +), in engine compartment wiring harness
D147	Connection (rear left speed sensor -), in engine compartment wiring harness
D148	Connection (rear right speed sensor +), in engine compartment wiring harness
D149	Connection (rear right speed sensor -), in engine compartment wiring harness
D184	Connection (front left speed sensor +), in engine compartment wiring harness
D185	Connection (front left speed sensor -), in engine compartment wiring harness
*	Cross section depends on equipment

G200	Lateral acceleration sender
G202	Yaw rate sender
G419	ESP sensor unit
G608	Vacuum sender
J104	ABS control unit
J623	Engine control unit
N135	Rear right ABS outlet valve
N136	Rear left ABS outlet valve
T47	47-pin connector
V64	ABS hydraulic pump
43	Earth point, lower part of right A-pillar
366	Earth connection 1, in main wiring harness
388	Earth connection 23, in main wiring harness
638	Earth point, on right A-pillar
A199	Positive connection 4 (15a) in dash panel wiring harness
B131	Connection (54), in interior wiring harness
*	see applicable current flow diagram for engine
*2	Only models with hydraulic brake servo (HBS)
*3	Only models with "High" equipment (AW1)
*4	Only models with "Low" equipment (AW0)

E492	Tyre Pressure Loss Indicator button
G201	Brake pressure sender 1
J104	ABS control unit
L76	Button illumination bulb
N99	Front right ABS inlet valve
N100	Front right ABS outlet valve
N101	Front left ABS inlet valve
N102	Front left ABS outlet valve
N227	Vehicle stabilization program high-pressure valve 1
N228	Vehicle stabilization program high-pressure valve 2
T6ak	6-pin connector
T47	47-pin connector
388	Earth connection 23, in main wiring harness
B340	Connection 1 (58d), in main wiring harness
B383	Connection 1 (powertrain CAN bus, high), in main wiring harness
B390	Connection 1 (powertrain CAN bus, low), in main wiring harness
*	Only models with Tyre Pressure Monitoring System
*2	Only models with "High" equipment (AW1)
*3	Only models with "Low" equipment (AW0)

J519	Onboard supply control unit
J533	Data bus diagnostic interface, in left footwell, near centre console
T16	16-pin connector
T20	20-pin connector
T52b	52-pin connector
T52c	52-pin connector
T73a	73-pin connector
T73b	73-pin connector
80	Earth connection 1, in dash panel wiring harness
B383	Connection 1 (powertrain CAN bus, high), in main wiring harness
B390	Connection 1 (powertrain CAN bus, low), in main wiring harness
B397	Connection 1 (convenience CAN bus, high), in main wiring harness
B406	Connection 1 (convenience CAN bus, low), in main wiring harness
B708	Connection 1 (dash panel insert CAN bus high) in main wiring harness
B709	Connection 1 (dash panel insert CAN bus low) in main wiring harness
*	Only models with "High" equipment (AW1)
*2	Diagnostic connection
*3	Only models with "Low" equipment (AW0)

F9	Handbrake warning switch
F34	Brake fluid level warning contact
G34	Front left brake pad wear sender
H3	Buzzer and gong
J285	Control unit in dash panel insert
K47	ABS warning lamp
K118	Brake system warning lamp
K155	ESP and TCS warning lamp
K220	Tyre Pressure Loss Indicator warning lamp
T2ap	2-pin connector
T2bb	2-pin connector
T2w	2-pin connector
T32	32-pin connector
132	Earth connection 3, in engine compartment wiring harness
376	Earth connection 11, in main wiring harness
655	Earth point, on left headlight
B379	Connection 1 (brake pad wear indicator), in main wiring harness
B380	Connection 2 (brake pad wear indicator), in main wiring harness
B383	Connection 1 (powertrain CAN bus, high), in main wiring harness
B390	Connection 1 (powertrain CAN bus, low), in main wiring harness
B708	Connection 1 (dash panel insert CAN bus high) in main wiring harness
B709	Connection 1 (dash panel insert CAN bus low) in main wiring harness
*	According to equipment
*2	Only models with warning function for brake pad wear
*3	Only models with "Low" equipment (AW0)
*4	Only models with "High" equipment (AW1)