CRUISE CONTROL – Audi Q5 2.0T 2011 – SYSTEM WIRING DIAGRAMS

CRUISE CONTROL

Cruise Control Wiring Diagram for Audi Q5 2.0T 2011

List of elements for Cruise Control Wiring Diagram for Audi Q5 2.0T 2011:

• 12a
• 1bl
• 2.0l
• 3.2l
• Abs control module (left side of engine compt)
• Accelerator pedal position sensor & accelerator pedal position sensor 2
• Clutch pedal sensor (m/t)
• Comfort system central control module (left side of trunk)
• Computer data lines system
• Cruise control switch
• Direct shift gearbox (dsg) mechatronic (w/ direct shift a/t) (on transmission)
• Distance regulation control module (if equipped)
• Engine control module (ecm) (in plenum chamber driver's side)
• Fuse 5a
• Fuse carrier 1
• Fuse carrier 2
• Fuse panel sc
• Fuse panel sd
• G12 (between suspension strut chamber & plenum chamber front left)
• G638 (behind right lower "a" pillar trim)
• G639 (behind left lower "a" pillar)
• G687 (on left side of center tunnel)
• Hot at all times
• Left front abs wheel speed sensor (left front brake hub)
• Left rear abs wheel speed sensor (left rear brake hub)
• Nca
• Red
• Relay/ fuse panel sb (driver's side plenum chamber on eletronic box)
• Right front abs wheel speed sensor (right front brake hub)
• Right rear abs wheel speed sensor (right rear brake hub)
• Steering column electronic systems control module (on steering column)
• T17e
• T17r
• T32c
• T60
• T94
• Throttle valve control module (rear of engine)
• Transmission control module (tcm)
• Transmission control module (tcm) (w/o direct shift a/t) (on transmission)