POWER DISTRIBUTION – Ford E-350 Super Duty XL 2014 – SYSTEM WIRING DIAGRAMS

POWER DISTRIBUTION

Power Distribution Wiring Diagram (1 of 9) for Ford E-350 Super Duty XL 2014

List of elements for Power Distribution Wiring Diagram (1 of 9) for Ford E-350 Super Duty XL 2014:

• (engine control red
• (engine control sensor wiring harness, in breakout to battery)
• (engine control sensor wiring harness, near breakout to battery junction box (bjb))
• (right rear of engine)
• Battery
• Battery junction box (bjb) (except stripped chassis: left front of engine compt (stripped chassis: mounted to front of left chassis frame rail)
• Battery secondary
• C1035a
• C1035b
• Except stripped chassis
• Fusible link j (8 ga- red)
• G109 (except stripped chassis: right front of engine compt) (stripped chassis: right end of front chassis cross rail)
• G120
• G121 (w/ dual battery) (front right side frame rail)
• G300 (w/o aft axle tank) (under right side of vehicle, near midship secondary battery)
• G400 (w/ aft axle tank) (under right side of vehicle, near aft axle secondary battery)
• Generator
• Red
• S106
• S107
• S113
• S114 (engine control sensor wiring harness, near breakout to battery junction box (bjb))
• S303
• S313 (w/o aft axle tank) s413 (w/ aft axle tank)
• Sensor wiring harness, in breakout to battery)
• Starter motor
• Stripped chassis
• To fuse 15 (diagram 2 of 9)
• To smart junction box (sjb) (diagram 3 of 9)
• W/ dual battery

Power Distribution Wiring Diagram (2 of 9) for Ford E-350 Super Duty XL 2014

List of elements for Power Distribution Wiring Diagram (2 of 9) for Ford E-350 Super Duty XL 2014:

• (except stripped chassis: engine control sensor wiring harness, near breakout to windshield wiper motor) (stripped chassis: engine control sensor wiring harness, near breakout to anti-lock brake system (abs) module) s136
• (except stripped chassis: left front of engine compt) (stripped chassis: mounted to front of left chassis frame rail) battery junction box (bjb)
• (except stripped chassis: right front of engine compt) (stripped chassis: right side of engine compt)
• (not used)
• 5.4l flex fuel, 5.4l lpg, 5.4l cng & 4.6l flex fuel
• 6.8l, 6.8l cng & 6.8l lpg
• A/c clutch relay
• Abs test connector
• Anti-lock brake system (abs) module
• Auxiliary blower motor relay
• Battery junction box (bjb) (except stripped chassis: left front of engine compt) (stripped chassis: mounted to front of left chassis frame rail)
• Battery junction box (bjb) (except stripped chassis: left front of engine compt) (stripped chassis: mounted to front of left chassis frame rail)
• Blower motor relay
• C110
• C1551b
• C175b
• C2026
• C219
• C264
• C291
• C300
• C405
• Customer access
• Cutaway
• Evaporative emission (evap) canister vent valve
• Except
• Except cutaway
• Except stripped chassis
• From a battery junction box (bjb) (diagram 1 of 9)
• From c fuse 14 (diagram 2 of 9)
• From ignition switch (diagram 4 of 9)
• Fuel pump relay
• Fuse 10a
• Fuse 15a
• Fuse 20a
• Fuse 30a
• Fuse 40a
• Fuse 50a
• G100
• Horn relay (stripped chassis)
• Instrument panel cluster (ipc) (stripped chassis)
• Left turn/stop trailer tow relay
• Powertrain control module (pcm)
• Red
• Reversing lamp relay
• Right turn/stop trailer tow relay
• Run/start relay
• S108
• S129 (engine control sensor wiring harness, near breakout to brake fluid level switch)
• Stripped chassis
• To battery junction box (bjb) (diagram 6 of 9)
• To battery junction box (bjb) (diagram 7 of 9)
• To battery junction box (bjb) (diagram 8 of 9)
• To battery junction box (bjb) (diagram 9 of 9)
• To fuse 31 (diagram 2 of 9)
• To fuse 33 (diagram 3 of 9)
• To smart junction box (sjb) (diagram 6 of 9)
• W/ advance trac
• W/ advance trac w/o advance trac
• W/o advance trac
• Windshield wiper relay

Power Distribution Wiring Diagram (3 of 9) for Ford E-350 Super Duty XL 2014

List of elements for Power Distribution Wiring Diagram (3 of 9) for Ford E-350 Super Duty XL 2014:

• & stripped chassis
• (apim)
• (except stripped chassis: left kick panel) (stripped chassis: left side of dash) smart junction box (sjb)
• (gpsm)
• (main wiring harness, near breakout to smart junction box (sjb)
• (not used)
• (t-box jumper harness, near breakout to modem antenna) s272
• 3rd row seat enable (fet)
• Ac outlet
• Ac-a
• Ac-b
• Acc
• Accessory protocol
• Anti-lock brake system (abs) module
• Back lighting led (fet)
• Battery junction box (bjb) (except stripped chassis: left front of engine compt) (stripped chassis: mounted to front of left chassis frame rail)
• Brake pedal position switch
• Bsi (fet)
• C110
• C210
• C2108
• C219
• C2280a
• C2280b
• C2280d
• C2280g
• C263
• C268
• C432
• Cbp41
• Customer access
• Cutaway
• Cutaway & stripped chassis
• Dc/ac inverter module (w/ 110v power inverter) (behind center of dash)
• Except cutaway
• Except stripped chassis
• Exterior rear view mirror switch
• Floor lamp (fet)
• From d fuse 16 (diagram 2 of 9)
• From splice f s200 (diagram 6 of 9)
• From splice s114 b (diagram 1 of 9)
• Front cigar lighter
• Fuse 10a
• Fuse 15a
• Fuse 20a
• Fuse 30a
• Fuse 40a
• Fuse 50a
• Fuse 5a
• Fuse 7.5a
• G200 (right center of dash)
• G203 (left kick panel)
• Gd116
• Global
• Gnd
• Hot
• Hya01
• Hya02
• Inline fuse
• Instrument panel power point 1
• Instrument panel power point 2
• Interface module
• Interior lighting (fet)
• Keypad illum (fet)
• Led+
• Led-
• Left low beam (fet)
• Lf turn lamp (fet)
• Lr stop/ turn lamp (fet)
• Lr turn lamp (fet)
• Lya03
• Neut
• Positioning
• Puddle lamp (fet)
• Rear power point
• Red
• Rf turn lamp (fet)
• Right low beam (fet)
• Rr stop/ turn lamp (fet)
• Rr turn lamp (fet)
• Rya03
• S218
• S240
• S268
• Sbp01
• Sync w/o navigation
• System module
• Talematics module (crew chief)
• To fuse 17 (diagram 5 of 9)
• To fuse 74 (diagram 4 of 9)
• To splice s159 (diagram 7 of 9)
• Tpms (fet)
• Trailer brake control (tbc) module (crew chief)
• Vbatt
• W/ advance trac
• W/o advance trac
• White light (fet)

Power Distribution Wiring Diagram (4 of 9) for Ford E-350 Super Duty XL 2014

List of elements for Power Distribution Wiring Diagram (4 of 9) for Ford E-350 Super Duty XL 2014:

• (engine control sensor wiring harness, near breakout to windshield wiper motor) s143
• (main wiring harness, near breakout to g202) (except stripped chassis) s227
• (main wiring harness, near breakout to ignition switch) (stripped chassis) s244
• (not used)
• (stripped chassis)
• Acc
• Battery charge trailer tow relay
• Battery junction box (bjb) (except stripped chassis: left front of engine compt) (stripped chassis: mounted to front of left chassis frame rail)
• C1348
• C140
• C2095
• C215
• C2280a
• C2280b
• C2280d
• C2280e
• C264
• C291
• C300
• C3133
• Data link connector (dlc)
• Driver side front seat control switch
• Except stripped chassis
• From e fuse 65 (diagram 3 of 9)
• From smart junction box (sjb) (diagram 6 of 9)
• Fuse 10a
• Fuse 15a
• Fuse 20a
• Fuse 30a
• Fuse 50a
• Fuse 5a
• Ignition switch
• Lock
• Off
• Run
• Run/ acc ign sw
• Run/start ign sw
• Smart junction box (sjb) (stripped chassis: left side of dash) (except stripped chassis: left kick panel)
• Start
• Starter relay
• Stripped chassis
• To battery junction box (bjb) (diagram 2 of 9)
• To battery junction box (bjb) (diagram 9 of 9)
• To splice s132 (diagram 5 of 9)
• To upfitter switch (diagram 9 of 9)
• Windshield wiper motor
• Windshield wiper relay

Power Distribution Wiring Diagram (5 of 9) for Ford E-350 Super Duty XL 2014

List of elements for Power Distribution Wiring Diagram (5 of 9) for Ford E-350 Super Duty XL 2014:

• (engine control sensor wiring harness, near breakout to anti-lock brake system (abs) module) s139
• (engine control sensor wiring harness, near breakout to windshield wiper motor) s139
• (not used)
• 5.4l flex fuel, 5.4l lpg, 5.4l cng & 4.6l flex fuel
• 6.8l, 6.8l cng & 6.8l lpg
• Audio control module (acm) (except stripped chassis)
• Battery junction box (bjb) (left front of engine compt)
• Battery junction box (bjb) (mounted to front of left chassis frame rail)
• C1551b
• C175b
• C192
• C219
• C2280a
• C2280b
• C2280d
• C2408a
• C240a
• C291
• Data link connector (dlc)
• Digital transmission range (dtr) sensor (4r75e)
• Door lock relay
• Driver door unlock relay
• Except stripped chassis
• Fog lamp relay
• From h fuse 9 (diagram 3 of 9)
• From ignition switch l (diagram 4 of 9)
• Fuse 15a
• Fuse 20a
• Fuse 25a
• Fuse 5a
• In-dash computer (if equipped)
• Lh corner lamp (fet)
• Liftgate glass release relay
• Liftgate rel (fet)
• Park lamp relay
• Powertrain control module (pcm)
• Pulse train (fet)
• Rh corner lamp (fet)
• S132 (engine control sensor wiring harness, near breakout to brake fluid level switch)
• Smart junction box (sjb) (stripped chassis: left side of dash) (except stripped chassis: left kick panel)
• Start diode
• Starter relay
• Stripped chassis
• To fuse (diagram 6 of 9)
• W/ torqshift

Power Distribution Wiring Diagram (6 of 9) for Ford E-350 Super Duty XL 2014

List of elements for Power Distribution Wiring Diagram (6 of 9) for Ford E-350 Super Duty XL 2014:

• (engine control sensor wiring harness, near breakout to windshield wiper motor)
• (except stripped chassis)
• (main wiring harness, near breakout to c264) s234
• (main wiring harness, near breakout to passenger air bag)
• (not used)
• (t-box jumper harness, near breakout to modem antenna) s274
• (taillights wiring harness, near breakout to c263)
• 5.4l flex fuel, 5.4l lpg, 5.4l cng & 4.6l flex fuel
• 6.8l, 6.8l cng & 6.8l lpg
• Abs test connector
• Accessory delay relay
• Anti-lock brake system (abs) module
• Audio amplifier (w/ navigation)
• Audio control module (acm)
• Audio control module (acm) (base audio)
• Auto- dimming interior mirror (if equipped)
• Battery junction box (bjb) (except stripped chassis: left front of engine compt) (stripped chassis: mounted to front of left chassis frame rail)
• Battery junction box (bjb) (except stripped chassis: left front of engine compt) (stripped chassis: mounted to front of left chassis frame rail)
• Battery saver relay
• C140
• C1551b
• C175b
• C2026
• C210
• C2108
• C215
• C219
• C2280a
• C2280b
• C2280d
• C2280e
• C2385b
• C2408a
• C240a
• C264
• C265
• C268
• C291
• C300
• C3047
• C3049
• C310a
• C315
• C406
• Circuit breaker 30a
• Control
• Crew chief
• Driver side door lock switch
• Except stripped chassis
• From battery n junction box (bjb) (diagram 2 of 9)
• From fuse 27 (diagram 6 of 9)
• From j fuse 22 (diagram 5 of 9)
• From r splice s136 (diagram 2 of 9)
• From splice s136 (diagram 2 of 9)
• Fuel pump motor diode
• Fuel pump relay
• Fuse 10a
• Fuse 15a
• Fuse 20a
• Fuse 5a
• G100 (stripped chassis: right side of engine compt) (except stripped chassis: right front of engine compt)
• High beam relay
• Horn relay
• In-dash computer (if equipped)
• Instrument panel cluster (ipc)
• Master window adjust switch
• Passenger side door lock switch
• Passenger side window adjust switch
• Powertrain control module (pcm)
• Rear doors door lock switch (except cutaway)
• Rear view camera display mirror (w/o navigation)
• Restraints control module (rcm) (except stripped chassis)
• Run/start relay (modified vehicle)
• S108
• S200
• S236
• Smart junction box (sjb) (stripped chassis: left side of dash) (except stripped chassis: left kick panel)
• Steering position sensor
• Stripped chassis
• Telematics module (except stripped chassis)
• To accessory delay relay (diagram 6 of 9)
• To dc/ac inverter module (diagram 3 of 9)
• To fuse 34 (diagram 7 of 9)
• To splice s227 & s244 (diagram 4 of 9)
• Trailer brake control (tbc) module (except stripped chassis)
• W/ advance trac
• W/o advance trac

Power Distribution Wiring Diagram (7 of 9) for Ford E-350 Super Duty XL 2014

List of elements for Power Distribution Wiring Diagram (7 of 9) for Ford E-350 Super Duty XL 2014:

• (main wiring harness, near breakout to climate control assembly) s217
• (not used)
• Battery charge trailer tow relay
• Battery junction box (bjb) (except stripped chassis: left front of engine compt) (stripped chassis: mounted to front of left chassis frame rail)
• C2095
• C214
• C2280b
• C2280d
• C291
• C294a
• C406
• Climate control assembly
• Customer access
• Cutaway
• Except cutaway & stripped chassis
• Except stripped chassis
• From battery junction box (bjb) u (diagram 3 of 9)
• From q fuse 33 (diagram 6 of 9)
• From splice s136 s (diagram 2 of 9)
• Fuse 10a
• Fuse 20a
• Fuse 30a
• Fuse 5a
• Fuse 7.5a
• Instrument panel cluster (ipc)
• Parking aid module (pam) (except stripped chassis)
• Parking lamp trailer tow relay
• Passenger air bag deactivation (pad) switch (except stripped chassis)
• Passive anti-theft transceiver (except stripped chassis)
• Red
• S159 (stripped chassis: engine control sensor wiring harness, near breakout to horn) (except stripped chassis: engine control sensor wiring harness, near breakout to battery junction box (bjb))
• Smart junction box (sjb) (stripped chassis: left side of dash) (except stripped chassis: left kick panel)
• Stripped chassis
• Temperature blend door actuator
• Video camera

Power Distribution Wiring Diagram (8 of 9) for Ford E-350 Super Duty XL 2014

List of elements for Power Distribution Wiring Diagram (8 of 9) for Ford E-350 Super Duty XL 2014:

• (4.6l flex fuel: engine control sensor wiring harness & fuel charge, near breakout to coil on plug (cop) 1) (5.4l flex fuel, 5.4l lpg & 5.4l cng: engine control sensor wiring harness & fuel charge, near breakout to fuel injector 2) (6.8l, 6.8l cng & 6.8l lpg: engine control sensor wiring harness & fuel charge, near breakout to fuel injector 1) s177
• (4r75e: transmission control selector neutral switch wiring harness, near breakout to c192) (6.8l: transmission control selector neutral switch wiring harness, near breakout to torqshift transmission) s103
• (5.4l flex fuel, 5.4l lpg & 5.4l cng: engine control sensor wiring harness & fuel charge, near breakout to fuel injector 8) (4.6l flex fuel: engine control sensor wiring harness & fuel charge, near breakout to knock sensor 1) s174
• (5.4l flex fuel, 5.4l lpg, 5.4l cng: engine control sensor wiring harness & fuel charge, near breakout to coil on plug (cop) 7) (6.8l, 6.8l cng & 6.8l lpg: engine control sensor wiring harness & fuel charge, near breakout to fuel injector 6)
• (except stripped chassis: engine control sensor wiring harness, near breakout to brake fluid level switch) (stripped chassis: engine control sensor wiring harness, near breakout to anti-lock brake system (abs) module)
• (ho2s) 12 (stripped chassis & cutaway)
• (ho2s) 22
• (stripped chassis: engine
• 4r75e transmission (if equipped)
• 5.4l flex fuel, 5.4l lpg & 5.4l cng
• 5.4l flex fuel, 5.4l lpg, 5.4l cng & 4.6l flex fuel
• 6.8l, 6.8l cng & 6.8l lpg
• A/c clutch relay
• Battery junction box (bjb) (except stripped chassis: left front of engine compt) (stripped chassis: mounted to front of left chassis frame rail)
• Brake pedal position switch
• C1033
• C110
• C134
• C139
• C1551b
• C175b
• C192
• C219
• C291
• Coil on plug (cop) 1
• Coil on plug (cop) 10 (6.8l, 6.8l cng & 6.8l lpg)
• Coil on plug (cop) 2
• Coil on plug (cop) 3
• Coil on plug (cop) 4
• Coil on plug (cop) 5
• Coil on plug (cop) 6
• Coil on plug (cop) 7
• Coil on plug (cop) 8
• Coil on plug (cop) 9 (6.8l, 6.8l cng & 6.8l lpg)
• Control sensor wiring harness, near breakout to anti-lock brake system (abs) module) (except stripped chassis:
• Egr system module (esm) (4.6l flex fuel)
• Engine control sensor wiring harness, near breakout to c134) s124
• Evap purge valve (5.4l flex fuel, 5.4l lpg, 5.4l cng & 4.6l flex fuel)
• Evap purge valve (6.8l, 6.8l cng & 6.8l lpg)
• Except stripped chassis
• Except stripped chassis & cutaway
• From battery junction box (bjb) (diagram 2 of 9)
• From splice s129 (diagram 2 of 9)
• Fuse 10a
• Fuse 15a
• Fuse 20a
• Heated oxygen sensor
• Heated oxygen sensor (ho2s) 12
• Ignition transformer capacitor 1 (5.4l flex fuel, 5.4l lpg, 5.4l cng & 4.6l flex fuel)
• Ignition transformer capacitor 1 (6.8l, 6.8l cng & 6.8l lpg)
• Ignition transformer capacitor 2 (5.4l flex fuel, 5.4l lpg, 5.4l cng & 4.6l flex fuel)
• Mass air flow intake air temperature (maf/iat) sensor
• Nca
• Overdrive cancel switch
• Pcm power relay
• Powertrain control module (pcm)
• Powertrain control module (pcm) (5.4l flex fuel, 5.4l lpg, 5.4l cng & 4.6l flex fuel)
• Powertrain control module (pcm) (6.8l, 6.8l cng & 6.8l lpg)
• Reversing lamp relay
• S131
• Stripped chassis
• To brake fluid level switch) s137
• Universal heated oxygen sensor (ho2s) 11 (5.4l flex fuel, 5.4l lpg, 5.4l cng & 4.6l flex fuel)
• Universal heated oxygen sensor (ho2s) 11 (6.8l, 6.8l cng & 6.8l lpg)
• Universal heated oxygen sensor (ho2s) 21 (5.4l flex fuel, 5.4l lpg, 5.4l cng & 4.6l flex fuel)
• Universal heated oxygen sensor (ho2s) 21 (6.8l, 6.8l cng & 6.8l lpg)

Power Distribution Wiring Diagram (9 of 9) for Ford E-350 Super Duty XL 2014

List of elements for Power Distribution Wiring Diagram (9 of 9) for Ford E-350 Super Duty XL 2014:

• (not used)
• Battery junction box (bjb) (left front of engine compt)
• C219
• From battery junction box (bjb) (diagram 2 of 9)
• From battery junction box (bjb) (diagram 4 of 9)
• From smart junction g box (sjb) (diagram 4 of 9)
• G101 (left side of engine compt)
• G201 (left center of dash)
• Interior lights system
• S123
• S264
• Sw 1
• Sw 2
• Sw 3
• Sw 4
• Upfitter relay 1 (except stripped chassis)
• Upfitter relay 2 (except stripped chassis)
• Upfitter relay 3 (except stripped chassis)
• Upfitter relay 4 (except stripped chassis)
• Upfitter switch (except stripped chassis)