ENGINE PERFORMANCE – Hyundai Elantra GLS 2008 – SYSTEM WIRING DIAGRAMS

ENGINE PERFORMANCE

2.0L

2.0L, Engine Performance Wiring Diagram (1 of 3) for Hyundai Elantra GLS 2008

List of elements for 2.0L, Engine Performance Wiring Diagram (1 of 3) for Hyundai Elantra GLS 2008:

• A/c pressure transducer (right side of engine compartment)
• Anti-theft system
• Apt 5v
• Apt gnd
• Apt sig
• Batt pwr
• Cruise control system
• E/r junction box (in left front corner of engine compartment)
• E/r-cbg
• Ecm
• Ect sens gnd
• Ect sens sig
• Ecu 2 fuse 10a
• Ecu fusible link 30a
• Gbg11
• Gnd
• Hot at all times
• Hot in on or start
• Htr
• Ign coil ctrl cyl 1, 4
• Ign coil ctrl cyl 2, 3
• Ignition coil
• Ignition coil 1
• Ignition coil 2
• Inj ctrl 1
• Inj ctrl 2
• Inj ctrl 3
• Inj ctrl 4
• Knock sens gnd
• Knock sens sig
• Maf/map/tia sens gnd
• Main relay
• Main rly on in
• Map/ mass air flow
• Nca
• Nca vg
• Nca vip
• Nca vn
• Nca vrc
• On/start in
• Ots gnd
• Ots sig
• Oxygen sensor (down) (rear of engine compartment, in exhaust)
• Oxygen sensor (up) (a/t) (left rear of engine)
• Pnk
• Red
• Right front wheel sensor (w/o abs/esc) (top of strut tower)
• Sens gnd
• Sens pwr
• Sens sig
• Shld gnd
• Sig
• Snr
• Snsr 1 fuse 10a
• Throttle position sensor (on throttle body assembly)
• Tia sens in
• To inj fuse e/r junction box (diagram 2 of 3)
• To spark plugs
• Tps 5v
• Tps gnd
• Tps sig
• Veh spd
• Vg lamda
• Vip lamda
• Vn lamda
• Vrc lamda
• Whl spd in (+)
• Whl spd in (-)

2.0L, Engine Performance Wiring Diagram (2 of 3) for Hyundai Elantra GLS 2008

List of elements for 2.0L, Engine Performance Wiring Diagram (2 of 3) for Hyundai Elantra GLS 2008:

• (on intake) mass air flow sensor
• Canister close valve
• Canister close valve (above fuel tank)
• E/r junction box (in left front corner of engine compartment)
• E/r-cbg
• E/r-erom
• E/r-frt
• F/pump fuse 15a
• From main relay e/r junction box (diagram 1 of 3)
• Ftp
• Fuel pump relay
• Gbg11
• Ge11 (left front of engine compartment)
• Hot at all times
• Inj fuse 15a
• Injectors (top of intake manifold runners)
• Knock sensor (on right side of engine block)
• Nca
• Oil temperature sensor (left rear of engine)
• Pnk
• Red

2.0L, Engine Performance Wiring Diagram (3 of 3) for Hyundai Elantra GLS 2008

List of elements for 2.0L, Engine Performance Wiring Diagram (3 of 3) for Hyundai Elantra GLS 2008:

• (fuel pump motor: below center of rear seat) (fuel sender: below rear seat) fuel sender & fuel pump motor
• A/con compressor sw
• A/con req sw
• A/con rly ctrl
• Air conditioning system
• Anti-theft system
• Camshaft position sensor (on right front of engine)
• Can hi
• Can lo
• Ccv
• Cluster fuse 10a
• Computer data lines system
• Cooling fans system
• Cpsv ctrl
• Crankshaft position sensor (left rear of engine)
• Cvvt ctrl
• Ecm
• Eng rpm sig
• Engine coolant temperature sensor & sender (left rear of engine)
• Fan rly ctrl hi
• Fan rly ctrl lo
• Fuel consumption sig
• Fuel gnd
• Fuel pump motor
• Fuel sender
• Generator
• Gf71
• Gnd
• Hot in on or start
• Htr
• I/p junction box
• I/p-c
• I/p-f
• I/p-g
• Idle speed actuator (on top of engine)
• Immo ind
• Injection sig
• Instrument cluster
• Instrument cluster system
• Isa ctrl close
• Isa ctrl open
• M10-a
• M10-b
• Main rly on in
• Micom
• Mil ind
• Nca
• O2 sens htr up
• Oil control valve (left rear of engine)
• Pnk
• Purge control solenoid valve (left rear of engine compartment, on bracket)
• Red
• Rly ctrl
• Sender
• Sensor
• Sig
• Starting/charging system
• Tacho sig