BODY COMPUTER – Ford Ranger 1998 – SYSTEM WIRING DIAGRAMS

BODY COMPUTER

Body Computer Wiring Diagrams (1 of 2) for Ford Ranger 1998

List of elements for Body Computer Wiring Diagrams (1 of 2) for Ford Ranger 1998:

• (1032)
• (main harn, in breakout to gem)
• (or red/pnk)
• 4wabs
• 4wd mode sw input
• 4wd mode switch (w/ electronic shift control)
• Anti-lock brakes system (rear axle sensor)
• Anti-theft switch
• Battery
• Battery saver relay ctrl
• C221
• C224
• Computer data lines system ((dlc) pin 7)
• Door ajar ind ctrl
• Down window command input
• Engine controls system (vss)
• Fuse 7.5a
• G104 (top center of left fender apron)
• G108 (left side of upper radiator support)
• Generic electronic module (gem)/ central timer module (ctm) (behind center of dash)
• Gnd
• Hot at all times
• Hot in acc or run
• Hot in run
• Hot in start
• I/p fuse panel (behind left side of dash)
• Ignition (acc/run)
• Ignition (run)
• Ignition (start)
• Ignition key warning input
• Instrument cluster system (i/c c215 pin 1)
• Instrument cluster system (i/c c215 pin 10)
• Interior lamp relay ctrl
• Interior lights system (batt saver relay pin 2)
• Interior lights system (int lamp relay pin 2)
• Interval delay/wash input
• Left door ajar input
• Multi- function switch
• One touch down relay out
• One touch down sense (hi)
• One touch down sense (lo)
• Park sense
• Park/headlamps on input
• Power windows system (accessory delay relay)
• Power windows system (left motor ground)
• Power windows system (master control switch)
• Power windows system (otd module pin 2)
• Rabs
• Right door ajar input
• Run/park relay ctrl
• S205
• S209
• S215
• S227
• S238 (with rap)
• Seat belt ind ctrl
• Seat belt input
• Self test iso link
• Tan/red
• Tone generator
• Vehicle speed sensor
• Vss out
• Warning systems (clock spring assembly)
• Warning systems (i/c c216 pin 10)
• Warning systems (left door ajar switch)
• Warning systems (main light sw/park lamp relay)
• Warning systems (right door ajar switch)
• Warning systems (seat belt switch)
• Washer pump relay ctrl
• Wiper hi-lo relay ctrl
• Wiper mode select sw input
• Wiper/washer system (hi/low relay pin 5)
• Wiper/washer system (multi-function sw pin 1)
• Wiper/washer system (multi-function sw pin 6)
• Wiper/washer system (run/park relay pin 5)
• Wiper/washer system (washer pump relay)
• Wiper/washer system (wiper motor pin 6)

Body Computer Wiring Diagrams (2 of 2) for Ford Ranger 1998

List of elements for Body Computer Wiring Diagrams (2 of 2) for Ford Ranger 1998:

• (transmissions system (pulse vacuum hublock solenoid)
• 4wd high range ind ctrl
• 4wd low range ind ctrl
• 4wd mode switch (w/ electronic shift control)
• 4wd mode switch output
• 4wd out
• A/t
• Anti-theft system ((rap) module c409 pin 10)
• Anti-theft system ((rap) module c410 pin 11)
• Brake on/off (boo) sw input
• Brake pedal position switch (on brake pedal support)
• C222
• C223
• Door ajar output (rap module)
• Electric shift control module (behind center of dash)
• Electric shift relay
• Electric shift relay ctrl
• Fuse 20a
• G123 (right side of firewall)
• Generic electronic module (gem)/ central timer module (ctm) (behind center of dash)
• Gnd (m/t) neutral sense in (a/t)
• High to low relay ctrl
• Hot at all times
• I/p fuse panel (behind left side of dash)
• Illum entry out (rap module)
• Instrument cluster system (c214 pin 2)
• Instrument cluster system (c214 pin 3)
• Low to high relay ctrl
• M/t
• Nca
• Pvh sol (high)
• Pvh sol (low)
• Relay box (behind dash, right side of steering column)
• S107
• S228 (main harn, near breakout to generic electronic module)
• Touch drive switch a input
• Touch drive switch b input
• Touch drive switch c input
• Touch drive switch d input
• Transfer case assembly
• Transmission range (tr) sensor (left side of transmission)
• W/ 4wd & electronic shift control
• W/ electronic shift control